Fish Feed Machine

Requirement of Raw Material for fish feed machine:

This fish feed machine(also called fish feed extruder machine) can use different kinds of material as follows:

Type: Flour, corn starch, rice bran, meat meal, bone meal, fish meal, etc.

Size: about 60-80 mesh which was crushed and well mixed.

Moisture content: about 20%-25%

Starch content: ≥30%

Usages of Final Pellets from fish feed machine:

Aquatic feed pellets: fish, shrimp, frog, etc.

Pet feed pellets: dog, cat, rabbit, chicken, goose, duck, pig, etc.Welcome to contact us and discuss our floating fish feed pellet mill.

Technical information of fish feed machine:

Product manual of fish feed machine:

1. The floating pellet extruded feed produced by this fish feed machine can float on the water surface for at least 12 hours without foaming. fish feed maker machine will cause waste of feed and will not pollute the water quality. The material of the fish feed pellet machine can effectively kill harmful bacteria such as Escherichia coli and Salmonella through high temperature and high pressure, which ensures the hygiene of the feed, fish feed machine is conducive to protein denaturation absorption and starch gelatinization and is easy for fish and livestock to absorb. Generally(floating fish feed pellet machine), the use of extruded floating fish feed saves 8%-15% of feed than powder or pellet feed(floating feed machine). The production of cooked submerged aquatic and livestock pellet feeds can eliminate most of the toxins and anti-nutritional factors antitrypsin and urease contained in the materials, which is beneficial to the digestion and absorption of animals and improves the digestion and utilization rate of nutrients.

2. This fish food making machine adopts the international advanced granulation structure, adopts the knife shaft positioning spring and the cutting form, realizes the step-less speed change, and can cut the output material into the desired length products arbitrarily. The design is novel and unique, the structure is simple, easy to install, easy to dismantle and easy to disassemble, and easy to operate. The screw and the screw are made of special wear-resistant high temperature and high humidity material 38 chrome-molybdenum aluminum, which is first quenched and tempered and then heat-treated to form, which has the advantages of wear resistance and long service life(small electric fish feed extruder machine). Equipped with a unique pressurized die device to ensure the output and quality of feed; an electric heating device to improve the feed extruding rate(fish pellet making machine), the main shaft bearings are combined with Japanese Seiko and Swedish SKF bearings to ensure the safety and reliability of the fish feed machine. The main motor adopts high-quality Y series three-phase motor to ensure strong power; the reducer cooperates with the main motor to ensure sufficient power.

The working principle of the fish feed machine:

The working principle of the screw fish feed pellet machine is: the powdery raw material containing a certain amount of starch (above 20%) is conditioned by a conditioner to make the moisture content of the material reach 10% to 27%, and the temperature is raised to 70 to 98 ℃. The quenched and tempered material enters the screw extrusion cavity(fish pellet machine). Since the volume of the extrusion cavity gradually decreases along the axis, the pressure on the material gradually increases, and the compression ratio can reach 4 to 10(fish feed machine). The material is pushed by the screw extrusion, accompanied by strong shearing and friction. According to the need, the material can be heated by the stream flowing through the barrel jacket, so that the material is in a high temperature and high-pressure state, and the starch in the material can be heated. Gelatinization occurs. When the material is extruded from the die hole by great pressure, the temperature and pressure drop sharply due to the sudden departure of the body into the atmosphere. Under the combined action of the pressure difference and temperature difference, the volume of the feed rapidly expands, the water evaporates rapidly, dehydrates, and solidifies, and then The cutter is cut into short grains to form extruded pellet feed.

Advantages of fish feed machine:

The fish feed making machine is suitable for the production of various extruded granules, which are not easy to foam and disperse, and are easy to absorb. The fish feed making machine can extrude crushed corn, soybean, and soybean meal into pellets for feeding to animals. The feed pellets made by the fish feed machine do not dissolve in water and float in water for a long time. Moreover, it increases the palatability of animals and increases their appetite of animals(floating fish feed machine).

1. fish feed making machine has electric and diesel engine, you can choose according to your own needs. The pellets made by the fish food making machine have many shapes, such as heart-shaped, square, round, and various shapes. The fish feed machine only needs to replace the abrasives for these shapes. Make whatever shape you want.

2. This fish feed making machine is suitable for making dog food, cat food, cattle and sheep breeding, pet feed, bird food, fish food, etc. It can also be used in feed pellet extruding production lines.