Material : Wood waste less than 50 mm(diameter)Capacity : 1-1.5 t/hPower : 55-132 kwGuarantee : 1 yearApplication : Preprocessing of wood waste for pellet production
What Is a Hammer MillHammer mill is the most common auxiliary equipment for pellet production, for not all raw materials are right for pelletizing. Yearmega hammer mill is of large capacity and wide application. It is mainly used for crushing coarse sawdust, wood shaving, straw or small wood pieces less than 50 mm.
Wood Hammer Mill Spotlights
1. The reasonable arrangement of hammers and clearance between hammers and screens make sure the final products are in uniform fineness.
2. The secondary grinding chamber is assembled in this machine. The base has goof rigidity and little vibration.
3. The whole process is complete in the close chamber, no dust and low noise.
4. The secondary grinding chamber is assembled in this machine. The base has goof rigidity and little vibration.
5. We adopt quality Germany bearing with the temperature indicator, efficiently avoiding overheating of bearings.
6. Various thickening screen sieve sizes are selectable.
How the Hammer Mill Works
The raw material goes through the feed hopper into the grinding chamber and crushed by the high speed rotating hammer plates. Under the impact of centrifugal force, the materials will be continuously crushed into powder. By the suction of the fan, the powder will be discharged through the sieve while those that can not go through the sieve will be pulverized again until they can pass the sieve holes.

Hammer Mill CrusherTechnical Parameters
| Model | MFSB60 | MFSB80 | MFSB100 | MFSB120 |
Capacity (t/h) | 1-1.5 | 1.8-2.5 | 2.8-3.5 | 3.8-4.5 |
Power (kw) | 55 | 75 | 110 | 132 |
Rotor diameter (mm) | 660 | 660 | 660 | 660 |
Spindle speed (rpm) | 2980 | 2980 | 2980 | 2980 |
Hammer line speed (m/s) | 78 | 78 | 78 | 78 |
Grinding chamber width(mm) | 600 | 800 | 1000 | 1200 |
Hammer number | 112 | 128 | 144 | 156 |