-
E-mail
mkt@sd-lg.com
-
Phone
86-535-6266888
-
Address
Yantai·Shandong·China
Membership
Help
Shandong Lugong Machinery Co., Ltd.Free·1YRS
mkt@sd-lg.com
86-535-6266888
Yantai·Shandong·China
| Item | Specification |
| Power (HP) | 70 |
| Model | LT704, Wheel tractor |
| Type | Wheel type |
| Frame type | Safety shelf |
| Driving type | 4WD |
| Application | General use |
| External dimension(mm) | 3690×1500×2335 (Safety shelf top) |
| Wheel base (mm) | 1970 |
| Commonly used wheel tread (Front/Rear) or gauge (mm) | 1210/1180 |
| Wheel tread (Front/Rear) or gauge (mm) | 1210、1310/1105-1430 |
| Minimum ground clearance and position (mm) | 315 (Bottom of traction plate) |
| Minimum weight (KG) | 2010 |
| Standard Counterweight (Front/Rear) (KG) | 96/50 (Safety shelf) |
| Minimum service ratio (KG/KW) | 39.03 (Safety shelf) |
| Number of gears (Forward/Backward) | 8/2 |
| Number of main gears | 4+1 |
| Number of range shift | 2 |
| Maximum theoretical design speed (Km/h) | 31.6 |
| Connection mode between engine and main clutch | Direct connection |
| Type of roll protection device (Cab or safety frame) type | Safety frame |
| Item | Specification |
| Engine brand | YUNNEI |
| Engine structure | Inline, Water-cooled, Four-stroke |
| Engine intake mode | Naturally aspirated |
| Number of engine cylinders | 4 |
| Engine nominal power (KW) | 51.5 |
| Net power rating of engine (KW) | 51.5 |
| Engine calibration speed | 2300 |
| Engine cooling mode | Water cooling |
| Air filter type | Dry-type |
| Steering system type | Full hydraulic steering |
| Steering system steering control mechanism | Steering control |
| Steering system type of steering mechanism | Front wheel steering |
| Tyre Model (Front/Rear) | 7.50-16/12.4-28 |
| Hydraulic suspension system type | Separate |
| Type of suspension | Three-point rear suspension |
| Number of hydraulic output groups | 1 |
| Full opening pressure of the safety valve of the working device (Mpa) | 16±0.5 |
| Number of splines of power take-off shaft | 6 |
| Standard speed of power output shaft (r/min) | 540/720 |