(Oats Powder) Spray Dryer is the most widely used process in liquid shaping technology. It is suitable for producing powder and granules solid products from solution, emulsion, soliquoid, and pumpable paste materials. Therefore, when the particle size, final moisture, bulk density and granules shape meet the accurate standard, centrifugal spray drying is a ideal drying process.
The centrifugal spray dryer is a continuous atmospheric pressure dryer that uses a pneumatic or electric atomizing device to make the liquid high-speed centrifugal spray into droplets, so that these droplets are in contact with the hot air in the drying room and dried instantaneously.
Working Principle
The feed pump pumps the solution water reducing agent to the high-speed centrifugal atomizer in the center of the drying tower, and uses the centrifugal force generated by the high-speed rotation to atomize the feed liquid into fine droplets. The hot air heated by the heat source enters the drying tower after being reasonably distributed by the air distributor. The mist and hot air are fully mixed in the drying tower, and the heat and mass are exchanged quickly, and they are dried into powder products in a very short time. Products with larger particle diameters are discharged from the bottom of the drying tower, and products with smaller particle diameters follow. The hot air enters the cyclone dust collector, the separated products are discharged through the discharge valve, and the tail gas containing a small amount of dust is emptied after being dusted by the water dust collector.
Characteristics:
1. High operational flexibility on non-adhesive or low-adhesive liquid materials.
2. Simple structure of the spray nozzle, easily used and maintained.
3. Less power consumption, low cost.
4. The hollow spherical product with big particles, good mobility and solubility.
5. Can be used to spray-cooling granulation process, such as paraffin, grease particles, special resins, etc.
Applicable Materials
Oats Powder
Pulse the oats until they are ground into a powder-like consistency. Depending on the speed and power of your food processor, this process should take 60 seconds or less. Stop and stir to ensure that all the oats have been finely ground. One cup of rolled oats will yield approximately 1 cup of oat flour.
Ceramic: Alumina, zirconia, magnesium oxide, titania, pottery clay, china clay, all kinds of magnetic porcelain and metal-oxides, etc.
Chemical: Aluminium polychlorid, disperse dyes, reactive dyes, organic catalyzer, white carbon black, washing powder, zinc sulfate, silica, sodium metasilicate, potassium fluoride, calcium carbonate, potassium sulfate, ingotganic catalyzer and all kinds of waste liquid, etc.
Specification
Type
Spray Dryer
5
25
50
100
150
200-3000
Inlet Temperature
≤ 350°C
Outlet Temperature
80-90°C
Evaporate Capacity (kg/h)
5
25
50
100
150
200-3000
Driving Force
compressed air drive
mechanical drive
Rotate Speed
25000
22000
21500
18000
18000
15000
Diameter of Atomizer (mm)
50
120
120
120
150
180-340
Heating Source
Electricity
Electricity
electricity +steam+fuel oil+coal gas
electricity +steam
electricity +steam+fuel oil+coal gas
To be solved by users
Electric-heating Power (kW)
9
45
60
81
99
Recovery Rate (%)
≥ 95
≥ 95
≥ 95
≥ 95
≥ 95
≥ 95
Installation Size
A(mm)
1000
1290
1730
2500
2800
B(mm)
2100
3410
4245
5300
6000
C(mm)
2300
4260
4645
6000
6700
φ D(mm)
1060
1800
2133
2560
2860
E1(mm)
1050
1200
1640
2100
2180
E2(mm)
1050
1200
1640
2100
2180
F(mm)
750
1000
1250
1750
1970
G(mm)
530
1700
1750
1930
2080
H(mm)
530
1300
1800
2600
3050
I(mm)
530
1550
1600
1780
1960
Our services and advantages
A strict quality management system is applied to our manufacturing process to ensure that high-quality products are always provided. With 20 years of experience, XINGGANDRYING has also developed a global sales network and exported to North America, Europe, Australia, South Africa, Southeast Asia, East Asia and other regions.
A complete after-sales service system can immediately respond to customer maintenance needs. Our mission is to lead the research and production of laboratory equipment, and to provide the best cost-effective solutions for global customers.