(Ceramic Tile Powder) Spray Dryer is the most widely used process in liquid shaping technology. It is suitable for producing powder and granules solid products from solution, emulsion, soliquoid, and pumpable paste materials. Therefore, when the particle size, final moisture, bulk density and granules shape meet the accurate standard, centrifugal spray drying is a ideal drying process.
Working Principle
Liquid material is atomized through a special pressure nozzle with a high-pressure pump. Hot air enters the dryer after being adjusted by an air distributor. The material and hot air is mixed in the dryer, rapidly carries on heat and mass transfer. Powder or granular products are produced in a very short time. Products with larger particles size are discharged from the bottom of the dryer, smaller particles enter the cyclone with hot air. The exhaust gas is discharged into the air after dust removal in a scrubber. The dryers can be divided into high, middle and low-pressure spray dryers according to different pressures of atomization, while taking into account different flow fields, they are divided into co-current, fountain mode and counter-current spray dryers.
Characteristics:
1. Fast drying speed, also suitable for heat-sensitive particles;
2. The obtained product is spherical particles with uniform particle size, good fluidity and solubility, high product purity and good quality;
3. It has a wide range of applications, including hot air drying, granulation, cooling granulation, spray crystallization, spray reaction, etc.;
4. It can be matched with fine powder return and re-wet agglomeration system to meet the user's requirements for physical diameter.
5. Simple and stable operation, convenient control, easy to realize automatic operation, product particle size, bulk density and moisture can be adjusted within a specific range.
Applicable Materials
Ceramic Tile Powder
A ceramic is any of the various hard, brittle, heat-resistant and corrosion-resistant materials made by shaping and then firing a nonmetallic mineral, such as clay, at a high temperature. Common examples are earthenware, porcelain, and brick.
Chemical industry: sodium fluoride (potassium), basic dyes and pigments, dye intermediates, compound fertilizers, formaldehyde silicic acid, catalysts, sulfuric acid, amino acids, white carbon black, etc.
Ceramics: alumina, ceramic tile materials, magnesium oxide, talcum powder, etc.
Specification
Type
Spray Dryer
5
25
50
100
150
200-3000
Inlet Temperature
≤ 350°C
Outlet Temperature
80-90°C
Evaporate Capacity (kg/h)
5
25
50
100
150
200-3000
Driving Force
compressed air drive
mechanical drive
Rotate Speed
25000
22000
21500
18000
18000
15000
Diameter of Atomizer (mm)
50
120
120
120
150
180-340
Heating Source
Electricity
Electricity
electricity +steam+fuel oil+coal gas
electricity +steam
electricity +steam+fuel oil+coal gas
To be solved by users
Electric-heating Power (kW)
9
45
60
81
99
Recovery Rate (%)
≥ 95
≥ 95
≥ 95
≥ 95
≥ 95
≥ 95
Installation Size
A(mm)
1000
1290
1730
2500
2800
B(mm)
2100
3410
4245
5300
6000
C(mm)
2300
4260
4645
6000
6700
φ D(mm)
1060
1800
2133
2560
2860
E1(mm)
1050
1200
1640
2100
2180
E2(mm)
1050
1200
1640
2100
2180
F(mm)
750
1000
1250
1750
1970
G(mm)
530
1700
1750
1930
2080
H(mm)
530
1300
1800
2600
3050
I(mm)
530
1550
1600
1780
1960
Our service:
One year warranty, 24-hour hotline service, complete components and parts are available at any time.
The company has a professional after-sales service team, they come from manufacturing personnel, they are very familiar with the operation of the equipment, they will solve all the problems encountered by customers, and provide you with maintenance and use advice in time.