Intubation hat, pipe hoop chart
Intubation hat, pipe hoop Parameters DN Nominal Diameter | Jack Cheng Depth Depth of Socket | Jack Cheng Diameter Dimension of Socket | Wall thickness Wall Thickness | Thick pipe crowns End Wall Thickness | Middle length The length of midst | Center to the bottom bearing jack Center to Bottom of Socket | Cmin | Kmin | Dual Socket Pipe hoop Coupling | Single Socket Pipe hoop Half- Coupling | 45°Three oblique Lateral | A | H | DN | NPS | Jmin | d1 | 3000 LB | 6000 LB | 9000 LB | 3000 LB | 6000 LB | 3000 LB | E | F | 3000 LB | 6000 LB | 3000 LB | 6000 LB | Sch80 | Sch160 | XXS | Sch80 | Sch160 | XXS | Sch80 | Sch160 | Sch80 | Sch160 | 6 | 1/8 | 10 | 10.7 | 3.2 | 3.5 | - | 5.0 | 6.5 | - | 6 | 16 | - | - | - | - | | 8 | 1/4 | 10 | 14.1 | 3.3 | 4.0 | - | 5.0 | 6.5 | - | 6 | 16 | 32 | - | 8 | - | | 10 | 3/8 | 10 | 17.5 | 3.5 | 4.4 | - | 5.0 | 6.5 | - | 6 | 17 | 37 | - | 8 | - | | 15 | 1/2 | 10 | 21.8 | 4.1 | 5.2 | 8.2 | 6.5 | 8.0 | 11.0 | 10 | 22 | 41 | 51 | 11 | 13 | | 20 | 3/4 | 13 | 27.4 | 4.3 | 6.1 | 8.6 | 6.5 | 8.0 | 12.5 | 10 | 24 | 51 | 60 | 13 | 14 | | 25 | 1 | 13 | 34.2 | 5.0 | 7.0 | 10.0 | 9.5 | 11.0 | 14.0 | 13 | 29 | 60 | 71 | 14 | 18 | | 32 | 1.1/4 | 13 | 42.9 | 5.3 | 7.0 | 10.6 | 9.5 | 11.0 | 14.0 | 13 | 30 | 71 | 81 | 18 | 21 | | 40 | 1.1/2 | 13 | 48.3 | 5.6 | 7.8 | 11.2 | 11.0 | 12.5 | 16.0 | 13 | 32 | 81 | 98 | 21 | 25 | | 50 | 2 | 13 | 61.1 | 6.1 | 9.5 | 12.2 | 12.5 | 16.0 | 19.0 | 19 | 41 | 98 | 120 | 25 | 29 | | 65 | 2.1/2 | 16 | 76.9(73.8) | 7.7 | 12.5 | - | 16.0 | 19.0 | - | 19 | 43 | - | - | - | - | 80 | 3 | 16 | 89.8 | 8.3 | 13.8 | - | 19.0 | 22.0 | - | 19 | 45 | - | - | - | - | 100 | 4 | 19 | 115.5 | 9.4 | - | - | 22.0 | 28.5 | - | 19 | 48 | - | - | - | - |
| Note: 1、Average of socket wall thickness around periphery shall be no less than listed values. The minimum values are permitted in localized areas. 2、Upper and lower values for each size are the respective maximum and minimum dimensions. | |