What are the best 3-4 tractor implements for a 15-25 acre vegetable farm? In my mind, the best equipment to have would be a 30-50 Horsepower tractor with the following attachments: a rolling cultivator, offset disk, flail mower, and then the dreaded rototiller. What would you advise? Is it JINMA 2WD 50HP Wheel Farm Tractor(jinma 500C)?
All this really points to the need for two tractors when farming on the scale your are proposing (15-25 acres). You need a wide, heavy tractor for “pulling" and a tall, lighter, narrow-tired tractor for bed forming, bed shaping, cultivation etc. For 25 acres I would be looking at an 80 HP tractor for ground prep and heavy work and maybe a 50 HP “row-crop" tractor for the lighter “in row" work. So you need according to your farm size to chose a jinma tractor.
Tractor Parameters | Model | JM-500C |
| Drive Type | 2WD |
| Overall Dimensions L×W×H(mm): | 3395X1435X2133 |
| Wheel Track (mm) | Front | 1050~1450 |
| Rear | 1150~1450 |
| Wheel Bass(mm) | 1839 |
| Ground Clearance (mm) | 405 |
| Rated Traction Force(N) | 7800 |
| Construction Mass(kg) | 1380 |
| Min.Turning Radius(m) | 3.9 |
| Theoretical Speed (km/h) | Forward | 2.02、2.56、4.16、6.60、8.61、10.87、17.7、28.07 |
| Reverse | 1.89、8.04 |
Theoretical Speed (With creeper) km/h) | Forward | —— |
| Reverse | —— |
Theoretical Speed (With Shuttle) km/h) | Forward | —— |
| Reverse | —— |
Engine Specifications | Model | 4G33T |
| Type | 4-cylinder, Vertical,water cooled, 4 stroke cycle |
| Rated Power(kw/hp) | 36.8/50 |
| Rated Speed (rpm) | 2300 |
| Bore×Stroke (mm) | 95×115 |
| Total Displacement(L) | 3.26 |
Drive System | Clutch | 10″ single stage |
| Gear Box | (4+1)×2 |
| Main Drive | One Pair of Spiral Bevel Gearing |
| Differential | Bevel Gear |
| Differential Lock | Jaw Lock |
| Final Transmission | Spur Gear,External,Gearing |
Traveling Mechanism | Tyre | Front | 6.00-16 |
| Rear | 11.2-28 |
| Steering Gear | Full Hydraulic Steering |
| Brake | Disc type |
Working Device | Hydraulic System | Lifting Capacity at 610mm Behind Lift Point (N) | 6600 |
| 3-Point Suspension | Category:I |
| P.T.O Shaft | Rotating Speed (rpm) | 540/720 or540/1000 |
| Spline Size | 6-∮35Rectangular Spline |