Welcome Customer !

Membership

Zhangjiagang Humper CNC Machinery Co., Ltd
Free Member ·1YRS
ZhangJiaGang,JiangSu
Manufacturer

Main Products: Pipe Bender

Xwboo>Products

SB130CNC Tube Bending Machine

Model
Nature of the Manufacturer
Manufacturer
Product Category
CNC tube bending machine
Place of Origin
City, Province
Overview
The dlectric control system uses famous Japanese controllers,such as servo drivers,sdrvo motors,positioning modules and CPUs manufactured by the Mitsubishi Corporation,and is high in performance and good in stability.
Product Details

Feature

l.The dlectric control system uses famous Japanese controllers,such as servo drivers,sdrvo motors,positioning modules and CPUs manufactured by the Mitsubishi Corporation,and is high in performance and good in stability.

2.The Mitsubishi ultra-large CPU can accommodate 400 groups of files for com piling, if necessary,the additional transmission software is bought and installed in the computer,and the aocuments and files are stored in the hard disk,so that the number of compiling groupx is unlimitedly expanded.

3.Industrial-use computer type:the WINDOWS operating system is internally installed.and usedtogether with the Mitsubishi servo system,besides the Mitsubishi servo driving,the convenient file management owned by the WINDOWS ooperating system is also provided;and the files can be stored in the hard disk or soft disk; so that the compiling group number is unlimitedly expanded.

4.Automatic 3D simulation function for pipe-forming is selected as required.

5.An automatic error-fault detecting function is provided,and the errors and faults are displayed on the screen,so that the operator can much easily rtoubleshoot.

6.Automatic 3D simulation function for detecting interfering position is selected as repuired.

7.All processing data are inputted by the touch screen.

8.Based on the change of materials,each curve is set with a compensation value,a speed and a demoulding gap.

9.Each curve of one tube can be programmed with five action.sepuences and ten-stage speeds.so that the processing dfficiency is improved.and the interference pointis reduced.

10.Chinese/English languages are switched to display on the touch screen,and customers can also purchase the machine installed with other languages.

11.The feeding mode comprises the clamping feeding mode or the direct feeding mode which is selected as required.

12.The X.Y.Z coordinate can be automatically switched into the Y.B.C processing values.

13.After the data are compiled,the data is protected by a key,so that the data are prevented from any modification.

14.The dlectric control system is equipped with a heat exchanger for automatic heat dissipation;if necessary,a numerical control type refrigerator can be additionally bought,so that the life span of the electric control system is ensured.

15.An automatic oil charging system is installed to reduce friction of the bending tube.It prolongs the lifetime of the core rodand improves the quality of the bended tube

16.The machine can be connected with a printer so as to print the data displayed on the screen.

17.Communication interface can be installed as required,which can be connected to our company.Our engineer will provide remote service of rea time monitoring data updating,failure checking and so on.

18.A feeding cart’ s feeding position,safety position,wheel mode interfering position and guided mode interfering position are set,so that a hand wheel pulse wave generator can be finely tuned,the positions can be automatically remembered,and the error caused by the manual measurement and the loss caused by the feeding cart bumping the machine are eliminated.

19.The feeding shaft will perform automatic detection before acting so that the feeding shaft is avoided form bumping the machine.

20.when the curves are tested,analytical actions can be used the actions are modified by the careful observation of the interference points,so that the efficiency is improved.

Machine typeSB130CNC
Max bending capability for carbon steel(R=1.5D)Φ130×8.5t
Max bending capability for stainless steel(R=1.5D)Φ114×6.5t
Max. feeding distance( with mandrel)3500mm
Max. bending radius(R)600mm
Max. bending degree185°
Max. bending process of each pipe32
Working speedBendingMax. 45°/sec
RotaryMax. 270°/sec
FeedingMax. 700mm/sec
Working accuracyBending angle±0.1°(Hydraulic ±1°)
Rotary angle±0.1°
Feeding length±0.1mm
Max. oil pressure14mpa
Information inputting methodAxis (Y,B,C)
Bending method1.Servo 2.Hydraulic
Max. bending group500
Weight of machine8500kg
Size L W H(cm)590X145X160