Welcome Customer !

Membership

Henan Mine Crane Co., Ltd.
Free Member ·1YRS
JiYuan,HeNan
Manufacturer

Main Products: Crane

Xwboo>Products

Manually Operated Double Girder Overhead Crane

Model
Nature of the Manufacturer
Manufacturer
Product Category
Double Girder Overhead Crane
Place of Origin
City, Province
Overview
Capacity: 32/5,50/10Span: 10.5-31.5MLifting height: 16/18MWidely used in: Factories, warehouses, etc.
Product Details

Product introduction

The crane is composed with Girder frame, Crane travel device, and the trolley with lifting and moving device. There are Pave the rail for the trolley move on the main girder. Assemble the moving table on the outside of the two main girder, one side is prepare for the assemble and maintenance the crane move device, another side is prepare for the assemble of the trolley conductor device. There are full field of view Cabin suspend under the main girder, there are joint control desk or single control box packed within the Cabin, assemble the sidelong ladder between the Cabin and moving table, The main girder joint with the two side end carriage which with the joint point in the middle.

Crane girders

The crane girders are of welded girder construction. This result in lower dead weights with a high degree of vertical and horizontal rigidity and smaller wheel loads being transmitted to the crane runway.

Painting

In factory before manufacturing :

After manufacturing (after welding)

Average thickness : about 100 microns

Electrical elements

The crane that we are offering is designed to meet the required functions and requirement stated in your specifications, as well as for the operating conditions.

The sub-assemblies used by are standardized equipment of renowned manufactures and have been approved for specific crane operation by our test laboratory. Their characteristics regarding impact,vibrations, wear and safety were examined. A continuous high quality standard is ensured by series production and standardized sub-assemblies.

The electrical equipment is accommodated in robust steel plate control cubicles, on the crane girder.

Type of enclosure IP 55

All movements can be switched off by actuating the emergency-off switch at the control station via a main contactor.

Power supply cable and control cable along the girder

A protective earth conductor is fitted as standard. A crane switch is provided.

Travel end switches

Long and cross travel limited by means of preliminary and final limit switches

Overload protection

In the event of overload, the hoist unit switches off and only the lowering motion is possible.

Capacity

T

32/5,50/10

Span

m

10.5

13.5

16.5

19.5

22.5

25.5

28.5

31.5

Lifting height

m

16/18

Lifting speed

m/min

15.6

Trolley travelling speed

m/min

3.36-33.6,2.9-29

Crane travelling speed

m/min

92.7

93.7

86.5

Total weight

kg

15406

17290

20020

21724

24213

28579

31970

35389

Max. Wheel load

KN

104

111

120

125

132

144

152

162

Rail recommended

Model

43kg/m

Total motor power

kw

27.8

31.8

Main dimension (mm)

Span(m)

10.5

13.5

16.5

19.5

22.5

25.5

28.5

31.5

Rail top to crane top

H

1750

1840

Rail top to hook center

H4

55

5

Crane base distance

W

5140

5334

5940

Crane width

B

3450

4400

Trolley rail distance

K

1400

Hook left limitation

S1

800

Hook right limitation

S2

1250