Capacity: 2×50+100t, 2×75+100t, 2×100+160t, 2×150+200t, 2×400+400t Span: 50~185mSpan: 8-35MLifting height: 6-9mLifting speed: 28~76/10~50mWidely used in: Ship manufacture and the dock
Double Girder Gantry Crane for Shipbuilding is one kind of gantry crane, it main used to berth assembled hull. This kind of shipbuilding crane have the feature of load and unload, lifting, segmented turning the air. Have the advantage on turning the hull and close operations. the first is through the upward and downward adjustments, the entire segment by car to bear on. Ship gantry crane used in the place of ship manufacture and the dock, its task is to put all the parts required for the manufacture of the ship (ribs, steel, steel, etc.) from the ground transportation to manufacturing place. this transport work must be able to complete the task in a very long journey in transportation quickly. therefore, the number of cranes decided, enough to reach the dock area of the entire foundation, and each crane mutually interfere with each other in principle.
| Technical Specification |
| Lifting capacity | t | 2×50+100 | 2×75+100 | 2×100+160 | 2×150+200 | 2×400+400 |
| Two trolleys lifting | | 150 | 200 | 300 | 500 | 1000 |
| Section reverse lifting | | 100 | 150 | 200 | 300 | 800 |
| Work classifications | A5 |
| Span | m | 50 | 70 | 38.5 | 175 | 185 |
| Lifting height(m) | H1 | 35 | 50 | 28 | 65/10 | 76/13 |
| | H2 | 35 | 50 | 28 | 65/10 | 76/13 |
| Lifting speed(m/min) | Full load | 0.5~5 | 0.5~5 | 0.4~4 | 0.5~5 | 0.32~3.2 |
| | No load | 1~10 | 1~10 | 0.8~8 | 1~10 | 0.64~6.4 |
| Crane travelling(m/min) | Full load | 2.5~25 | 2~20 | 3~30 | 1~25 | 3~30 |
| | No load | 3.5~35 | 3~30 | 4.5~45 | 1~30 | 3~40 |
| Trolley travelling(m/min) | Full load | 2.5~25 | 2.5~25 | 3~30 | 1~25 | 3~30 |
| | No load | 2.5~35 | 2.5~35 | 3~45 | 1~30 | 3~40 |
| Wheel load | KN | 260 | 320 | 330 | 700 | 750 |
| Total power | KW | 400 | 530 | 650 | 1550 | 1500 |
| Power | 3-phase AC 50Hz 10KV |