Equipment introduction:
1.1 equipment overview:
This machine is mainly used for automatic forming of plane mask: the whole roll of cloth is driven by roller after being unrolled, and the cloth is folded and wrapped automatically. The whole nose bridge strip is drawn and unrolled. After cutting the length, it is imported into the edge cloth. The two sides are welded by ultrasonic welding
To the sealing, and then through ultrasonic lateral sealing, through the cutting tool cutting molding; Transfer the mask to two masks through an assembly line
Ear belt welding station, through ultrasonic welding final mask shape; After the mask is made, it is transported to the flat belt line through the assembly line for collection.
1.2 equipment installation and configuration requirements
(1) equipment size: 6500mm(L)×4500mm(W)×1900mm(H);
(2) appearance color: international standard warm gray 1C (standard color), in the absence of special instructions according to this standard;
(3) equipment weight: ≤5000kg, ground load ≤500KG/m2;
(4) power supply: 220VAC±5 ‰, 50HZ, rated power of about 9KW;
(5) compressed air: 0.5-0.7mpa, with a service flow of about 300L/min;
(6) operating environment: temperature 10-35 ℃, humidity 5-35%HR, no combustible, corrosive gas, no dust
(cleanliness not less than 100,000).
(7) operator: 1 person
The equipment mainly consists of structure:
No. | Machine part name | Qty | Remark |
1 | Filter cloth/filter cotton/water-absorbing layer unwinding mechanism | 3 sets | Max4 sets are randomly matched with 3 sets |
2 | Nose bridge strip unwinding mechanism | 1 set |
|
3 | Nose bridge alignment mechanism | 1 set | 3 to 7 mm wide |
4 | Nose bridge strip drive, cutting mechanism | 1 set | 3 to 7 mm wide |
5 | Fabric hem folding mechanism | 1 set |
|
6 | Roll welding edge sealing mechanism | 1 set | bilateral |
7 | Cloth drive mechanism | 2 sets |
|
8 | Fabric fan folding mechanism | 2 sets |
|
9 | Roll welding side seam mechanism | 1 set |
|
10 | Roll sealing mechanism | 1 set |
|
11 | Transfer line | 3 sets |
|
12 | Shunt institutions | 2 sets |
|
13 | Ear belt welding machine | 2 sets |
|
14 | Blanking line | 2 sets |
|
15 | The operating system | 1 set |
|
16 | Operation panel | 1 set |
|
Equipment can adapt to the incoming material and product case:
Name | Hanging scroll number | Width(mm) | Outside diameter of roll (mm) | Inner diameter of barrel (mm) | Weight |
Cloth | 3 | 170~200 | Φ600 | Φ76.2 | Max 15kg |
Article the bridge of the nose | 1 | 3~7 | Φ400 | Φ76.2 | Max 25kg |
Ear with | 4 | 3 |
Similar Product Recommend
|