IR470-55-bRUZ electromagnetic flow control valve
The BERMETER flow control valve is a hydraulically driven diaphragm type hydraulic control valve with an electric sulphur valve control. This valve digs the system flow and is pre-set.
The maximum value, the valve can be turned on or off by electrical signal control.
Crystallization characteristics and advantages
n can carry out flow and water pressure control, with electric valve control device
Port system pressure drive
Restricted water injection volume and user excess water demand
Electric signal digging open and close
■Advanced ball design, low fluid resistance and high efficiency
Daily flow channel without obstruction
Single moving part
Large daily traffic
■ Fully supported diaphragm, stable action balance
Low driving pressure required daily
Excellent low flow regulation performance
Mouth effectively prevents diaphragm deformation
■Flow sensing device (installed upstream
No live parts
No need for rectification
Well designed and easy to use
Simple mouth flow and pressure setting method
Easy to conduct online inspection and training
typical application
Computer control system
■ Farther or higher land plots
Pipeline water injection system
Multiple independent user water supply systems
Irrigation equipment
Transmission and distribution network
■Over the station
[1] The Bolt R47055-bR∪ valve is controlled by an electrical signal to limit the amount of water injected and the excess water demand, maintaining the filter backwash pressure.
[2] Burr extreme R43R type recoil valve
[3]Bermet R32-350A type recoil valve
[4]Bermet R470be type backwash flow control valve
[5]Bermet R920M56R type decompression metering with electric control device