PLUV V21.07(Big Power)Marking Laser Machine

Function of CKD-PLUV. V21.07:

n   Marking or engraving glass,crystal and diamond

n   UV 10W or 15W supports cut plastic,thin glass, paper and so on.

n   Surface peeling, such aspainting face of cosmetic packaging box, glasses frame, mirror or reflect material.

n   Marking logo, series number, QR code, bar code, bit map (photo / picture) on almost material, includingglass, PCB, PVC, PC, leather, wood, stone, jade and so on.

n   Support file of ai, plt, dxf,dst, svg, nc, g, jpg, png, text, and excel.

n   Automatically jump number andgenerate code.

Advantage of CKD-PLUV, V21.07:

n   Portable and big power UV laser.

n   Independent combination: can load kinds of devices, such as motorized X-axis, Y-axis, Z-axis, R-axis ormanual X, Y, Z.

n   Co-work with your equipment: can be installed on food machine, packing machine, auto accessory machine and so on.

n   355nm cold laser, none or smaller deformation for processed material than other lasers.

n   Optional marking scope:100*100/150*150/200*200mm

n   Water-cooling

n   Support 220V, 50Hz or 110V,60Hz.

What should I install after receiving this machine? Easy three steps:

1.     Installon Z-axis column on base board and laser source on Z-axis.

2.     Water in chiller and link to laser source.

3.     Install marking software in your computer.

Optional devices:

Position bar: CKD-PB01, for fixing material and mark on the same location on material.

Rotaryfor jewelry: CKD-RF00-50, chuck diameter is 50mm

Rotary for big material: CKD-FR01-80H, chuck diameter is 80mm

Manual X-Y table: CKD-MT2D, for slightly moving location

Cutting fixture: CKD-TMFG, for clapping thin material during cutting or engraving, toavoid transformation

Laser protect goggle: GM-2000, 200-450 & 800-2000nm multi-wavelength protection,OD4+, full made of laser protect material including glass legs, ergonomic design.

The marking software is EzCad2, support Windows 7/10, with languages of Chinese,English, Japanese, and Korean.

Optional LED focus tools, built-in galvanometer (marking head) or not.

Configuration:

How to choose marking scope, are focus tools necessary?

Cutting:100*100mm

Deeply engraving: 100*100mm

Surface marking / printing: bigger scope than 100*100mm, also depend on laser power(refer to table above) and your maximum logo / figure / marking content.