P/N : HL-2P-T/RHD Video

NegotiableUpdate on October 26

Model

Nature of the Manufacturer: Other

Product Category: Telephone/Ethernet to Fiber Converterer

Place of Origin: City, Province

Online Consult Contact Information

Overview

Ho-Link this device uses a special digital multiplexing chip, which integrates almost all digital logic functions in the device, thus significantly improving the performance of the product and reducing the cost. The equipment has excellent performance, stable and reliable operation, low power consumption, high integration, small size and easy installation and maintenance. A single optical fiber can transmit 2 channels of telephone signals. Our company has the core technology, the use of PCM pulse coding modulation ......

Product Details

Features

1. Provide 2 channels telephone interface

2. Use of audio frequency transformer and photoelectric coupler to completely separate the telephone interface and other circuits

3. Voice interface support caller ID and provide polarity reversal signal

4. Each voice signal has three levels of over-current voltage protection

5. Conventional standard single mode transmission 20KM, multi-mode 1KM, the farthest single mode can be customized up to 100KM

6. Single fiber / dual fiber transmission (optional)

7. No compression, no delay, high fidelity speech

8. Plug and play, no debugging

9. Perfect LED status display function, easy to maintain and manage

10. The device distinguishes between transmitter and receiver, and the label distinguishes the relay switch and the telephone

Technical Indexes

FX0 relay（switch）
Serial no.	Parameter	Symbol	Min value	Typical value	Max value	Unit	Remarks
1	Fluid flow voltage	VR	30		120	VRMS	（17-60）HZ
2	Ring to check the voltage		35			V
3	Frequency ring detection		17		60	Hz
4	2-wire AC impedance		200Ω+ 680Ω// 0.1uF				Off-hook state
5	Return loss		20	40		db
6	Depth of parallelism		60	70		db
7	Common mode rejection ratio	CMRR	60	70		db
8	Power supply rejection ratio	PSRR		30		db
9	Idle channel noise	NC		75		db
FXS user（telephone）
Serial no.	Parameter	Symbol	Min value	Typical value	Max value	Unit	Remarks
1	Fluid flow voltage	VR			150	VRMS
2	Ringing voltage	Vring		75	90	V
2	Ringing frequency		17		60	Hz
3	Cutting fluid time				200	ms
4	2-wire AC impedance		200R + 680R // 0.1uF				Can be adjusted to 600Ω
5	Return loss		20	40		db
6	Depth of parallelism		60	70		db
7	Common rate rejection ratio	CMRR	60	70
8	Power supply rejection ratio	PSRR
	Vcc			30		db
	Vbat			30		db
9	Idle channel noise	NC		75		db
Telephone physical connector		RJ11
Fiber index
Module type				Single fiber（standard） Multi-mode is optional
Wavelength				1310nm 1550nm（Option is based on device function）
Module rate				155Mbps/1.25Gbps（Option is based on device function）
Power supply				DC 5V1A
Dimensions				10410428mm
Material				Aluminium ally
Tx power				＞-12db
Rx sensitivity				＞-24db
Fiber connector				FC （standard）SC/ST/LC(optional)
Other index
Working temperature				-20°C ~70°C
Storage temperature				-40°C ~85°C
MTBF				>100,000hours