RCC-03 Remote Control And Programming Centre

The communication interface can only be used to connect can-st compatible accessories, but does not include any other connection, such as LAN, Ethernet, ISDN, etc

It also allows the following functions:

1.Introduction to display function

2.Display the actual operating value (current / voltage / power output, etc.)

3.Realize software update

4.Upload / download Inverter Parameters

5.Update Inverter Parameters

6.Record fault information

7.Data collection for the data from the data logger and other devices connected to the communication bus, such as a BSP (battery state processor) or a compatible solar charging controller

The RCC-03 enables the user to supervise the system and to completely adapt it to the needs through the many parameter settings available on the Xtenders, on the VarioTracks and on the VarioStrings.

Thanks to its digital display, the RCC-03 provides clear and comprehensive indications on the state of the system in the chosen language.

The device memorizes the events that occurred on an installation and therefore anticipates any future problems.

A SD card reader is available and allows parameters recording, as well as the uploading of various pre-settings and of all future updates.

Meant for panel mounting.

Dimension H x L x l: 170 x 168 x 43.5 mm.

Supplied with 2 m cable (max. 50m).