fangpusun solar charge controller MPPT 75/05,MPPT75/10,MPPT100/15-
Untra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra fast MPPTcontroller will improve energy harvest by up to 30% compared to PWM charge controllers and by upto 10% compared to slower MPPT controllers.
Load output
Over-discharge of the battery can be prevented by connecting all loads to the load output. The load outputwill disconnect the load when the battery has been discharged to a pre-set voltage.
Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof.
Some loads (especially inverters) can best be connected directly to the battery, and the inverter remotecontrol connected to the load output. A special interface cable may be needed, please see the manual.
Battery Life: intelligent battery management
When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months.
The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightlyincrease the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy issufficient to recharge the battery to nearly the full 99%. From that point onwards the load disconnect level will be modulated so that a nearly 99% recharge is achieved about once every week.
Fangpusun charge controller
MPPT75/05
MPPT75/10
MPPT 100/15
System voltage
375 Wp
12/24 V Auto Select
Maximum output current
5A
10A
15A
Maximum PV power, 12V
1a,b)
70 W
135W
200W
Maximum PV power, 24V
1a,b)
135 W
230 V
270W
400W
Maximum PV open circuit voltage
1.5 A
75 V
100 V
Maximum efficiency
300 W
98 %
Self-consumption
10 mA
Charge voltage 'absorption'
300 W
Default setting:14,4 V / 28.8 V (adjustable)
Charge voltage 'float'
50 Hz
Default setting:13,8 V / 27,6 V(adjustable)
Charge algorithm
multi-stage adaptive
Temperature compensation
-16 mV / °C resp.-32 mV / °C
Continuous/peak load current
15A/50A
Low voltage load disconnect
11,1V / 22,2V or 11,8V / 23,6V or Battery Life algorithm
Low voltage load reconnect
13,1V / 26,2V or 14V / 28V or Battery Life algorithm
Protection
Battery reverse polarity (fuse)/Output short circuit / Over temperature
< 6 % (max. power)
Operating temperature
30 to +60°C (full rated output up to 40°C)
Humidity
95%,non-condensing
Data communication port
VE.Direct
94.8 %
See the data communication white paper on our website
ENCLOSURE
Colour
Terminals(fine / single wire)
99 %
Blue (RAL 5012)
6mm² / AWG10
Protection category
from 40 ℃
IIP22 (connection area)
Weight
0.35 kg 0 W
0.5kg
Dimensions (X x Y x Z)
100 x 113 x 38.5 mm
101 x 114 x 47 mm
STANDARDS
Safety
voltage (230 V +15 %/-10 %)
EN/IEC 62109
frequency (50 Hz +0.5 Hz/-3 Hz)
1a) If more PV power is connected, the controller will limit input power to the stated maximum.
resp . 500 ES
voltage (230 V +10 %/-15 %)
1b) PV voltage must exceed Vbat + 5V for the controller to start. Thereafter minimum PV voltage is Vbat + 1V
Maximum Power Point Tracking
Upper curve:
Output current (I) of a solar panel as function of output voltage (V).
The maximum power point (MPP) is the point Pmax along the curve where the product I x V reaches its peak.
Lower curve:
Output power P = I x V as function of output voltage.
When using a PWM (not MPPT) controller the output voltage of the solar panel will be nearly equal to the voltage of the battery, and will be lower than Vmp.
Programmable battery charge algorithm
See the software section on our website for details
Day/night timing and light dimming option
See the software section on our website for details
Programming, real-time data and history display options
- Modern Apple and Android smartphones, tablets, macbooks and other devices: see the VE.Direct Bluetooth Smart dongle and the MPPT app discovery sheet for screenshots.