Best 1000 Watt Pure Sine Wave Inverter

Best 1000 Watt Pure Sine Wave Inverter

1. An inline fuse between the  pure sine solar inverter and the battery is required by regulations for all installations. Again, refer to Table 4 for examples of correct fuse sizing for some regulations. This fuse protects your battery and wiring in case of an accidental short circuit during installation of the 1000 watt pure sine wave inverter or later damage to the wiring. The fuse and fuse holder need to be installed in the positive side of the DC circuit, as close as possible to the batteries and within the distance specified by the applicable installation code. Ensure all other power and ground connections have been made to the 1000w pure sine wave inverter before connecting the DC cables to the batteries.

2. Connect the cable from the POSITIVE connector on the 1000 watt sine wave inverter to the POSITIVE (POS +) terminal on the fuseholder. Observe the polarities carefully while performing the installation and do not reverse the polarities. Route both cables before making any connections. 

3. Connect the DC NEGATIVE cable to the NEGATIVE (NEG -) terminal on the battery. Next, connect the cable to the negative terminal on the 1kw off grid solar inverter. The connection to the negative terminal of the 24v off grid inverter should be the last connection made. A spark when making this final connection is normal.

4. For residential installations, a DC wiring enclosure is required to cover the DC connections. Contact us or your distributor for this part. For nonresidential installations, slide the rubber terminal boot covers up the cable and over the terminal connections.

5.Type:Inverter 12v 220v 1000w/240 volt pure sine wave inverter/24v pure sine wave power inverter/

12v to 120v pure sine wave inverter

Xihe Electric is one of the leading China Other Products manufacturers, our factory is able to produce cheap best 1000 watt pure sine wave inverter Other Products with reliable quality. Welcome to wholesale products from us.