XTM 2600-48 Series Hybrid Inverter/Charger

XTM 2600-48 series Hybrid Inverter/Charger is the heart of your energy system and so the key element for a smart, efficient and smooth energy management.An XTM consists of the DC-AC Inverter, AC-DC Battery charger, AC-AC Transfer system, and UPS.

2 auxiliary contacts allow automatic control of a genset, the discoennection of non-priority loads or other programmable functions.

These functions can be controlled in a totally automatic way for an optimal management of available energy in hybrid systems, in combination with VictorTeam MPPT solar charge controllers.

 

Features:

1.Compatible with most battery technologies

- like: AGM, GEL, Flooded LA NiCad, NiFE, Aquion, Redox, Lithium.

2.Transfer Switch(UPS、Back up power)

0 ms transfer time when switching from Inverter to AC input source

＜0.15 ms transfer time when switching from Inverter to AC input source

3.Surge Capacity (inductive load)

A.The inverter has a surge capability of 3X its continuous power rating.

B.The inverter load can exceed the continuous output power for up to 30 minutes, allowing a power boost without triggering and overload failures.

C.There is no need to choose more powerful inverters because of the excess load of a little time, which will greatly reduce the cost.

4.Ac input

Can access 2 kinds of AC power supply, and the two kinds of AC power supply for programming.

Compatible with any kind of AC source.

6 stages battery charging：

Bulk-Absorption-Floating-Equalization-reduced-floating-periodic absorption

Solar priority or battery priority can be set.

5.Modular design

Up to 2 sets in series to increase output power.

Up to 3 parallel to increase single-phase output power.

3 sets in parallel can form the three-phase power supply, up to 9 sets in parallel to form the three-phase power supply。

6.Remote monitoring function

Local monitoring and data acquisition through RCC.

Monitoring system through APP SmartEss.

Monitor the system through the Web side.

7.Electronic protection functions

Deep discharge protection.

Battery overvoltage shutdown .

Short circuit protection.

Overtemperature and overload protection.

Reverse polarity protection by internal fuse(except XTH3000).

Acoustic alarm at deep discharge or overheating.

 

Specifications：

Battery Voltage: 38~68Vdc

Output Voltage:Pure sine wave230Vac/120Vac

Output frequency:50/60HZ
Continuous power:2000 Va
Power 30 min: 2600Va

Power 5 s:6500Va

maximum charging current: 50 Amp
Dimensions（mm): 133×322×466
Warranty:5 years

 

Xihe Electric is one of the leading China XTM Hybrid Inverter/Charger manufacturers, our factory is able to produce cheap xtm 2600-48 series hybrid inverter/charger XTM Hybrid Inverter/Charger with reliable quality. Welcome to wholesale products from us.