Features:
AC input voltage range selected by switch
Small volume,low weight,high efficiency
Protections:short circuit/over load/over voltage
cooling by free air convection
LED indicator for power on
99% full load burn-in test
2 Years warranty
Model | HS-100-5 | HS-100-12 | HS-100-15 | HS-100-24 | HS-100-36 | HS-100-48 |
output | DC voltage | 5V | 12V | 15V | 24V | 36V | 48V |
Voltage tolerance | ±2% | ±1% | ±1% | ±1% | ±1% | ±1% |
Rated current | 20A | 8.3A | 6.7A | 4.2A | 2.8A | 2A |
Current range | 0~20A | 0~8.3A | 0~6.7A | 0~4.2A | 0~2.8A | 0~2A |
Rated power | 100W | 99.6W | 100.5W | 100.8W | 100.8W | 96W |
Ripple&noise | 80mvp-p | 120mvp-p | 120mvp-p | 150mvp-p | 150mvp-p | 180mvp-p |
DCvoltage ADJ.range | -9%~+10% | ±10% | ±10% | ±10% | ±10% | ±10% |
input | Voltage range | 90~132VAC/180~264VAC(selected by switch),254~373VDC |
frequency | 47~63HZ |
AC current | 2.4A/115VAC,1.2A/230VAC |
efficiency | 79% | 83% | 83% | 85% | 85% | 86% |
Inrush current | Cold start current18A/115VAC,36A/230VAC |
Leakage current | < 3.5mA/240VAC |
protection | overload | Rated output power115%~150% start over load protection |
protection type:hiccup mode,auto-recovery after fault condition is removed |
Over voltage | 6.8~8.2V | 15.6~17.8V | 18.6~20.8V | 30.6~33.2V | 42.6~44.2V | 54.8~56.6V |
protection type:hiccup mode,auto-recovery after fault condition is removed |
----- | ----- |
----- |
environment | Working temp,humidity | -10℃~+60℃,20%~90%RH |
Storage temp,humidity | -20℃~+85℃,10%~95%RH non-condensing |
Withstand vibration | 10~500HZ,2G10min/1cycle,period for 60 minutes,each axes |
safety | Withstand voltage | I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
Isolated resistance | I/P-O/P,I/P-FG,O/P-FG:100Mohms/500VDC |
Fit standard | Safety standard | Compliance toUL1012 |
EMC standard | Compliance toEN55022,CLASSA |
others | Dimension | 159*97*38mm(L*W*H) |
Weight/packing | 0.48kg/45pcs/22.5kg/0.041 m³/1.45CUFT |
note | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and25℃of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. |