FULL AUTOMATIC EDGE BANDING MACHINE

Edge Bander Woodfung WF360F corner rounding automatic edge banding woodworking machinery

WF360D automatic edge banding machine corner rounding Woodworking Machinery
This machine is specially designed and exclusive for foreign market by us,which is multifunction but favourable price.It is used
for MDF,wooden board and shaving board.It can complete the processes of feeding workpiece,feeding coiled material,edging,end
cutting,fine trimming,scraping and buffing.It can achieve the level as same as foreign machines and the price is favourable.It is
especially suitable for the factory producing board .

Main Material brand:DELTA Touch Screen/CHINT Electronic/DELTA PLC/solenoid valve AirTac/CSK guide/EASUN Cylinder

WF360F functions:Premilling→ Gluing → End Cutting → Rough Trimming→Fine Trimming →Corner Rounding→ Scraping → Buffing

WF360F woodworking edge banding machine full automatic premilling and CORNER ROUNDING edge bander Specifications:

Automatic edge bander for different board and different edge bander

PAINTFREE,LAMINATE,PRATICAL,MDF,SOLID PANELS

SOFT VANEER,PVC,ACRYLIC,PMMA,ABS EDGE BANDERS

Automatic Edge bander application:

DELTA Touch Screen Operation Panel

Taiwan Delta PLC microcomputer control system adopts touch screen intelligent control, which is convenient, quick and easy to use

Pre-milling

Use double milling cutters to modify the marks and burrs to achieve a better edge banding effect

Gluing part

The glue pot is heated and glued, and the glue is coated with an imported technology structure to make the sheet and the edge banding evenly glued.

The edge bａnd and the sheet are pressed tightly through the pressing wheel, and the adhesion is firm.

End Trimming

The front and rear aligning head is composed of the front aligning head and the rear aligning head. It moves through a linear CSK guide rail.

It adopts the structure of automatic tracking and high-frequency high-speed motor to make the cutting smooth

Rough Trimming

Rough trimming knife is used to leave a margin of 40-50 wire for fine trimming, and automatic die tracking and high-frequency high-speed motor are

used for rapid cutting.

Fine Trimming

Thefinishing knife is R2, leaving 5~6 wire allowance for scraping and trimming the arc with R2 trimming knife

Corner Rounding

The profiling tracking and rounding device can make the end surface of the plate smoother and look atmospheric

Scrapping

It is used to eliminate the secondary wave marks caused by the cutting process of trimming non-linear motion, and make the upper

ａnd lower parts of the board more smooth and tidy. At the same time, the scraping can also adjust the size of the arc to make the edge banding effect better.

Polishing

Use a plate polishing wheel to clean the processed plate, remove excess glue, and make the edge-sealing end surface smoother