
Edge Bander WF-360YC Woodworking machinery Automatic Edge Banding Machine
Woodfung's WF360YC is designed as a compact and durable entry-level edge banding machine with pre-grinding function and reasonable price.
The machine is equipped with pre-grinding, end trimming, flush trimming, PVC scraping and polishing functions.
Main Material brand:DELTA Touch Screen/CHINT Electronic/DELTA PLC/solenoid valve AirTac/CSK guide/EASUN Cylinder
WF360YC functions:Pre-milling→ Gluing → End Cutting → Rough Trimming→ Fine Trimming →Scraping → Buffing

WF360YC Specifications:
| Model | WF360YC |
| Motor power | 19KW |
| Panel width | ≥60mm |
| Panel thickness | 10~60mm |
| Edge band thickness | 0.4~3.0mm |
| Edge band width | 12~60mm |
| Feed speed | 0~13m/min |
| Working pressure | 0.7Mpa |
| size(LxWxH)cm | 5500x1100x1650mm |
| Weight | 2000KG |
Automatic edge bander for different board and different edge bander

PAINTFREE,LAMINATE,PRATICAL,MDF,SOLID PANELS

SOFT VANEER,PVC,ACRYLIC,PMMA,ABS EDGE BANDERS
Automatic Edge bander application:

DELTA Touch Screen Operation Panel
Taiwan Delta PLC microcomputer control system adopts touch screen intelligent control, which is convenient, quick and easy to use

Pre-milling
Use double milling cutters to modify the marks and burrs to achieve a better edge banding effect

Gluing part
The glue pot is heated and glued, and the glue is coated with an imported technology structure to make the sheet and the edge banding evenly glued.
The edge band and the sheet are pressed tightly through the pressing wheel, and the adhesion is firm.

End Trimming
The front and rear aligning head is composed of the front aligning head and the rear aligning head. It moves through a linear CSK guide rail.
It adopts the structure of automatic tracking and high-frequency high-speed motor to make the cutting smooth

Rough Trimming
Rough trimming knife is used to leave a margin of 40-50 wire for fine trimming, and automatic die tracking and high-frequency
high-speed motor are used for rapid cutting.

Fine Trimming
The finishing knife is R2, leaving 5~6 wire allowance for scraping and trimming the arc with R2 trimming knife

Scrapping
It is used to eliminate the secondary wave marks caused by the cutting process of trimming non-linear motion, and make the upper
and lower parts of the board more smooth and tidy. At the same time, the scraping can also adjust the size of the arc to make the edge banding effect better.

Polishing
Use a plate polishing wheel to clean the processed plate, remove excess glue, and make the edge-sealing end surface smoother

For choice
Grooving
Horizontal grooving and back board grooving are used for direct grooving of side boards and door line grooving,
reducing the working procedures of panel saws and vertical milling machines. It is convenient and quick to form at one time.

Woodfung Brand Edge bander Automatic edge banding machine finished working

