Introduction
This is a Y81 series side discharge 250 ton single master cylinder scrap metal BALER. This baler is mainly divided into a main engine and a hydraulic station. The main engine mainly includes a single master cylinder, two side cylinders, two door cover cylinders, door cover and pressing box, etc. The hydraulic station mainly includes fuel tank, motor, cooler and integrated valve block etc. Our balers can be customized and produced, and the accessories are all well-known brands at home and abroad, with guaranteed quality and long service life. This baler is widely used in scrap metal recycling plants, steel mills and ferrous metal smelting industries.
Technical Parameters
NO. | Parameter name and content |
1 | hydraulic system working pressure | ≤26MPa |
2 | Press box size | 2500x2000x1000mm |
3 | Block section size | (300x300)mm |
4 | Bale density (steel) | ≤2000/m³ |
5 | Single no-load cycle time | About 90 seconds |
6 | Operation method | Hand-in-one, remote control operation |
The parameters in the above table are for reference only.
Features of the Push-out Baler Machine
1. Hydraulic drive is adopted, and manual or PLC automatic control operation can be selected.
2. Side push out material.
3. No anchor screws are required for installation. In places without power supply, diesel engine can be used as power.
4. The size of the press box and the size of the bale can be customized according to customer needs.
Application
The scrap Metal Baler can baling various scrap metal scraps, such as steel shavings, scrap steel, scrap aluminum, scrap copper, scrap stainless steel and scrap car shells.
FAQ
Q1: How can i get the after-service?
A: We provide one year guarantee and lifelong maintenance.
Q2: Can I have a visit to your factory before the order?
A: Sure,welcome to visit our factory.
Our factory address: 29# Panlongshan Road,Jiangyin city,Jiangsu province,214429, P.R China
Q3:Are you a factory or trade company?
A: We are manufacturer with own factory for 20 years, export proportion 50~60%.
Q4:How can I trust your company?
A: With 20-years-professional design, we can provide you suitable suggestion and lowest price
1. Assessed by third party, national patents and CE, ISO for all equipment, .
2. Welcome to inspect anytime. We are near to Shanghai Pudong airport.
3. For our machine, we do very well on hydraulic balers,hydraulic shears.
Q5 :Is your price competitive?
A: Only good quality machine we supply. Surely we will give you best factory price based on superior product and service.