Foot Pressure Switch

Product Introduction:

Single Electric Foot Metal Pedal Control Switch FS-402 LT3

LT1 is classified into protective type and waterproof type according to the protectiongrade. According to the number of pedals, it can be divided into single pedal and double pedal.

LT2 is single pedal and single circuit.

LT3 is divided into two types: protective and unprotected.

According to the control circuit, it is divided into single circuit and double circuit.

LT3 foot switch Structure overview:

LT series foot switch is mainly composed of shell, contact group, pedal, etc. The purposeof controlling equipment has been achieved by stepping the pedal to make the contact open and close the control circuit.

LT1 foot switch has two sets of contacts in each specification.

Lt1-11 foot switch has only one foot pedal. Step down the foot plate and close the leftcontact group and disconnect the right contact group.

LT-02 type foot switch has two pedals. When the left foot pedal is depressed, the contactgroup on the left is disconnected; when the right pedal is pressed, the two groups of contact groups are disconnected at the same time.

LT2 foot switch adopts cast aluminum shell, and the switch is equipped with travel switch.When the foot cover is used, the push rod moves left, and the sliding bar of the travel switch is pushed to realize the contact opening and closing.

LT3 foot switch is single step plate, with one or two sets of contacts, which can realizea variety of combinations such as "one normally open", "one normally closed", "two normally open", "two normally closed", "one normally open and one normally closed". The usercan adjust it according to the needs.

Basic information :

Product Details: