The limit switch MD441-11Y is made of cast steel housing and has the characteristics of low cold resistance. This product is suitable for AC 25-60Hz, voltage up to 500V, DC voltage up to 400V control circuit or auxiliary circuit, as control, control, limit, interlock and other purposes.
Product Details
Product introduction:
The limit switch MD441-11Y is made of cast steel housing and has the characteristics of low cold resistance. This product is suitable for AC 25-60Hz, voltage up to 500V, DC voltage up to 400V control circuit or auxiliary circuit, as control, control, limit, interlock and other purposes.
operating principle:
Travel switch is widely used in all kinds of machine tools and lifting machinery to control their travel, terminal limit protection. In the control circuit of the elevator, the travel switch is also used to control the speed of opening and closing the car door, the limit of automatic opening and closing, and the upper and lower limits of the car protection. The travel switch can be installed on a relatively stationary object (such as a fixed frame, door frame, etc., referred to as still life) or a moving object (such as a car, door, etc., referred to as an animal). When an animal approaches a still life, the link of the switch drives the contact of the switch causing the closed contact to break or the open contact to close. The action of the circuit and mechanism is controlled by the change of the opening and closing state of the switch contact.
·2 cable entries M 20 x 1.5
·Actuator head can be repositioned in steps 4 x 90
·Metal enclosure
·Continuous adjustment of lever position 360
·2 Contacts
·Lever can be transposed by 180
·In temperature-resistant version,the roller can be mounted in two different positions on the shaft
·106 mm x 99 mm x 63 mm (basic component)
·Protection class IP65
Mechanical data
Actuating element
Roller lever
Roller material
Plastic
Mechanical life,minimum
5.000,000 Operations
Actuating angle,from left of switch axis
30.
Actuating angle,from right of switch axis
30°
Contact opening
2x 2.5 mm
Actuating speed,minimum
1 mm/min
Actuating speed,maximum
3 m/s
Note (Actuating speed)
Actuating speed with vertical actuating angle to switch axis
Ambient conditions-Insulation values
Rated insulation voltage Ui
250V
Rated impulse withstand voltage Uimp
4kV
Electrical data
Thermal test current
16A
Utilisation category AC-15
250 VAC
Utilisation category AC-15
4A
Switching element
NO contact,NC contact
Note (Switching element)
galvanically separated contact bridges
Switching principle
Snap action
Bounce duration,maximum
5ms
Switchover time,maximum
35 ms
Hot Tags: industrial limit switch md441-11y, China, suppliers, manufacturers, customized, wholesale, cheap, discount, bulk, in stock, free sample, Micro Switch 15a 250v, Limit Value Switch, Top Sealed Roller Plunger Limit Switch, Dual Foot Pedal Switch, NM 7 Series Switch, Foot Operated Emergency Stop Switch