MZEU15 Frewheel One Way Backstop Roller Clutch Bearing

MZEU15 Freewheel One Way Backstop Roller Clutch Bearing

Features:  

• We recommend a Shaft tolerance of h7, and ISO R773 (DIN 6885.1) keyway is standard.
• We recommend a tolerance of E H7 for the sprocket and other parts.
• Clean the surface of both ends of the outer race and the contact surfaces of the flange, sprocket and the other parts.
• For Model No. MZEU90 to MZEU150, apply seal adhesive to the surface of the outer race at both ends.
• Model No. MZEU12 to MZEU80 are pre-greased and require no lubrication. The operational temperature range is -40C to +40C. Model No MZEU90 to MZEU150 require oil lubrication.
• Model No. MZEU12 to MZEU80 sprockets and other torque transmitting factors can be used with the standard flange. 

• When installing standard flanges, sprockets and other equipment to the clutch fit them around the bearings and screw the bolts into both ends of the outer race.
• By installing both the flange and sprocket on the opposite side, the direction of rotation can be changed.
• When mounting the clutch onto the shaft, apply pressure to inner race but never to the outer race.
• For high speed Indexing applications (More than 50 c/m) a strong spring type isrecommended.

Dimensions and Capacities

Mounting and Coupling

Pictures