35mm Bore Size RSXM51 Sprag Clutch Bearing 18500RPM Rotation Speed

NegotiableUpdate on September 11

Model: RSXM51

Nature of the Manufacturer: Manufacturer

Product Category: Sprag Clutch Bearing

Place of Origin: City, Province

Online Consult Contact Information

Overview

Place of Origin: CHINA Brａnd Name: SUMA Certification: ISO SGS Model Number: RSXM51 ......

Product Details

Product Name:	Freewheel Clutch Bearing RSXM51	Material:	GCr15 Bearing Steel
Bore Size:	30-35mm	Torque Capacity:	135Nm
Rotation Speed:	18500RPM	Warranty:	1 Year
Unit Weight:	1.8Kg	OEM:	Accept
Outer Dia.:	105mm	Thickness:	35mm
High Light:	RSXM51 Sprag Clutch Bearing , 35mm bore Sprag Clutch Bearing , 35mm bore sprag type clutch

RSXM51 One Way Sprag Freewheel Clutch Bearings

Features

The series RSXM completes teh small to medium backstop range, which commenced with the highly successful RSCI programme. Type RSXM is a centrifugal lift off sprag type freewheel with the inner race rotating. Only the inner race is designed for freewheeling. It is a non self-supported type.Bearings must be provided to ensure concentricity of the inner and outer races and support axial and radial loads, as shown overleaf. Concentricity and run-out limits must be observed.

The RSXM type accepts all types of lubricant currently used in power transmission equipment. It is possible to mount these freewheels directly in gear-boxes without seperate lubrication. An oil mist ist generally sufficient. Grease lubrication may be acceptable if the unit works mostly in overrunning condition, as on E-motors. When used as a backstop, it must be checked that the overrun-ning speed will not go below the minimum speed given in the characteristic table.

Dimension and Capacity

35mm Bore Size RSXM51 Sprag Clutch Bearing 18500RPM Rotation Speed 0

Type	Bore dia.	Torque	Overrunning speeds
RSXM	dH7	TKN1)	nmax2)	nimin3)	nimax4)	D5)	D1h6	D2H7	L	Weight
RSXM	[mm]	[Nm]	[min-1 ]	[min-1 ]	[min-1 ]	[mm]	[mm]	[mm]	[mm]	[kg]
31	20	100	340	820	20000	85	31	55	24	0.75
38	20.25	135	320	770	18500	90	38	62	24	0.95
46	25.3	425	300	720	13500	95	46	70	35	1.4
51	30.35	525	220	525	12500	105	51	75	35	1.8
56	35.4	625	210	500	11500	110	56	80	35	1.8
61	35.4	420	265	640	14000	120	61	85	25	1.8
66	35.40.45	850	200	480	10000	132	66	90	35	2.7
76	40.45.50	1100	190	460	9000	140	76	100	35	3.1
86	45.5	1450	180	440	8000	150	86	110	40	4.2
101	45.55.60.70	1950	175	420	6500	175	101	125	50	7.3

NOTES

1) T max = 2 × T KN » Refer to Selection page 10 to 13

2) This maximum allowable torque transmission speed n max must not be exceeded when transmitting torque.

3) This minimum allowable overrunning speed n imin should not be rdeuced under continuous operation. Possible reduction of this minimum speed in request.

4) Inner race overruns. Keyway to DIN 6885.1

5) Tolerance +1 » Refer to mounting and maintenance instructions

Mounting

35mm Bore Size RSXM51 Sprag Clutch Bearing 18500RPM Rotation Speed 1

Pictures

35mm Bore Size RSXM51 Sprag Clutch Bearing 18500RPM Rotation Speed

RSXM51 Sprag Clutch Bearing

35mm bore Sprag Clutch Bearing

35mm bore sprag type clutch