Welcome Customer !

Membership

CHANGZHOU JKONGMOTOR CO., LTD.
Free Member ·1YRS
ChangZhou,JiangSu
Manufacturer

Main Products: Stepper Motor|DC Motor

Xwboo>Products

JKBLD750 Brushless DC Motor Driver

Model
Nature of the Manufacturer
Manufacturer
Product Category
Brushless Dc Motor Driver
Place of Origin
City, Province
Overview
Product Details

JKBLD750 Brushless DC Motor Driver

Product Description:

Main features:

Product Type: 750W BLDC Motor Driver

Place of Origin:china

Minimum order quantity:10pcs

Support Motor: Brushless dc motor less of 750w

Packing:The sample is packed in carton,the batch with plastic pallet

Delivery time:Standard product: 7-10days

Customized product: 25-30days

Transaction mode:EXW, FOB, FCA, CIF, FAS, CFR, CPT, CIP, DAF, DEQ, DDU, DDP...



Mechanical Size:

bldc motor driver




Functional Overview:

The JKBLD750 BLDC motor drive is a high performance, cost-effective 3phase BLDC motor drive, which can provide power output Max 750VA.The design is based on advanced DSP technology and feature high torque, low noise, low vibration, PID speed loop, PID current loop, over current protection, over load protection and a combined use of manual speed adjustment and automatic speed adjustment.







Connection Definition:

Mark

Definition

DC+/DC-

DC Power Input  (DC24V~DC48V)

U,V,W

Motor Lead Wire

Hu,Hv,Hw

Hall Sensor Lead Wire

REF+

Hall Sensor Power Supply +

REF-

Hall Sensor Power Supply -

VCC

External Potentiometer Power Supply ( Internal  Power Supply  Only)

SV

External Potentiometer ( No Connection When Adjusting  Speed With Internal Potentiometer ) or Pulse Rate In       Note①

COM

Common (Low Level/Ground)

F/R

Direction:  Low Level/CCW   High Level or No Connection/CW  Note ②

EN

Enable:  High Level/Stop  Low Level/Run      Note ②

BRK

Quick Brake:  High Level/Stop  Low Level/Run      Note 

SPEED

Speed Signal Output

ALARM

Alarm Signal Output


Note①: Potentiometer/10KΩ or analog signal DC 0V~+5V (Change

internal switch J1/DC0-10V).Turn off the internal potentiometer  RV

when using an external potentiometer to adjust the motor speed.

Note②:High level/5V (5mA)



Electrical Specifications

Parameter

Min

Rated

Max

Unit

Motor Hall Sensor Angle

120°/240°

     /

DC Power Input

18

48

50

V

Drive Current Output

0

25

45

A

Suitable Motor Speed

0

      /

20000

rpm

Hall Sensor Voltage

4.5

5

5.5

V

Hall Sensor Current

     / 

20

      / 

mA

External Potentiometer

     /

10K

      /

Ω




Speed Adjustment Instruction:

 Motor Speed Adjusted By The Internal Potentiometer RV:

SW1/ Off (Factory setting)   

 

 Motor Speed Adjusted By Analog DC 0V~+5V Input:

 SW1/ Off (Factory setting) set J1 (internal) as bldc motor driver (user Setting)   RV—Turn Off

 

 Motor Speed Adjusted By Analog DC 0V~+10V Input:

 SW1/ Off (Factory setting) set J1 (internal) as bldc motor driver (user Setting)   RV—Turn Off

 

 Motor Speed Adjusted By Pulse Rate Input:

Pulse rate: 0K—3KHZ Speed linear modulation  

Pulse amplitude: 5V   Pulse duty ratio: 50%

SW1/ On (User setting)      RV—Turn Off

  J7 (Internal)/ Switch on with the jumper cap on J1 (User setting)   

 

 Motor Speed Quick Response Setting:

SW2/ On ( User setting): PID closed loop--quick speed response

SW2/Off (Factory setting): Open loop--Normal speed response

 

 Motor Speed Signal Output:

Connecting SPEED and COM to get pulse output F=N*P/60

F—Pulse output frequency

P—Pole number of BLDC motor


 Drive Alarm Output:

When drive alarm, it will break over with the port of COM and be low

level. The drive stop to work and alarm light run.

 

 Lead Wire Connection: Take care of the sequence of U,V,W

 

Motor Parameter set by ICAN BLDD-01 (Optional) :

 RS232 Communication Interface CP-in

The BLDD48-45A  BLDC motor drive support RS232 communication Protocol to set motor run-up time, etc. When choose ICAN BLDD-01 as host controller, the operating process and instruction as below:


 ICAN BLDD-01 Motor Setting Panel Operating Process:

Connect to CP-in (BLDD48-45A)

SW1/ Off (Factory setting)   RV—Turn Off



BLDD-01 Parameter Setting Table:

Function code

Mode

Setting range

Unit

Factory setting

Alteration

P000

Control mode

00 BLDD-01 control

01 None host control


None    Panel control

P001

Panel setting speed

0~Rated speed

RPM


P002

Run-up time

0.1~9.9

S

0.2

P003

Motor pole number setting

1~99

Pole pairs

4

P004

CW CCW

01 CW

00 CCW


01

P005





Reserved

P006





Reserved


◆ BLDD-01 Panel Setting Process:

1. Turn on the power supply, press to stop the motor

2. Press <▲> or <▼> to choose the mode you need  (Press Esc  return and motor running)

3. Press enter into parameter mode (Press Esc return and motor running)

4. Press <bldc motor controller> or <bldc motor controller> to change the parameter (flashing)

5. Press to reserve, parameter stop to flash. Press return and motor running.

 

◆ Panel Protection Mode:

When the system running, panel nixie light shows Err×

Err0 represents Over-voltage or Over-temperature protection

Err1 represents Over-current protection

Err2 represents Hall sensor error protection

 

◆ Motor Parameter set by other host controller:

BLDD48-45A Communication Protocol (RS232)

1. Communication Interface:

Asynchronous serial communication

Baud rate:2400   

Start bit:1 bit

Stop bit:1 bit

Data bit:8 bits

Even/odd parity:none

Communication interface voltage:3.3V

 

2.Communication Protocol:

Function1:Motor speed controlled by drive BLD-750 itself

Communication format :“i"    

Instruction:send a character


Function2:Motor speed controlled by host computer

Communication format:“o"

Instruction:send a character


Function3:Motor speed set by host computer

Communication format:“v"0X00,0X00

Instruction:send a character “v" then two hexadecimal numbers

the high 16bits,the low 16 bits


Function4:run-up time

Communication format:“y“ 0X00

Instruction:send “y“ then a hexadecimal number




Safety attention:

1、The motor and drive wiring must be connected in the power-off state. Do not connect electrical wiring under power.

2、According to the illustrated method, connect the power cord, motor winding wire and Hall signal line correctly. Please pay attention to the order of UVW three-phase must be consistent.

3、Do not disassemble the drive at random to prevent damage.

4、Do not touch all terminals on power-on state.

5、Do not drive without shell operation

6、Impact of the drive may cause damage.

 

 



Customized Design:

If this product do not match with your request. Please feel free to contact with us,We can make customized shaft / winding / mounting flange / cable / connector / Encoder / Brake / Gearbox and others. We will works side-by-side with you and your team to design a motor that will fit the precise needs of your application. All Engineering and Support is done in-house.



Related BLDC motor:

80mm Brushless DC Motor, 86mm Brushless DC Motor, 110mm Brushless DC Motor.




FAQS:

1. How can get it started as soon as possible when you first use the drive?

After you correctly connect the power cord, the motor line, the Hall line, the external potentiometer slowly accelerates. After the motor is turned correctly, you can test the enable, direction and other functions. If you are unfamiliar with the product, the initial use should be done after the test. And then it can be installed to the actual use.

 

2. What will come about if power supply is reverse?

It will immediately burn the drive.

 

3. What is the maximum of the upper control signal voltage ?

The maximum voltage of the speed regulation signal is 5V. Exceeding this voltage will cause the drive to burn.

 

4. After the driver has been working for a long time, the shell is hot. Is it normal?

Yes, it is. At room temperature, after long working hours, it is up to 90 degrees. And it will not affect the performance.

 

5. The power indicator is light, but the motor does not turn and shift, what is the reason?

There may be a mistake in the phase line and the Hall line. Please re-energize the wiring according to the motor manual.

 

6. Can my motor speed transferred to 6000 with this drive?

The maximum speed of the brushless motor is determined by the parameters of the motor itself. The drive can control the motor speed from 0 to the highest speed.

 

7. I already have a motor and how to install this drive after wiring?

You must first determine the motor phase and the definition of the Hall line, and then you can connect it with wires. If you are not sure, you need to ask the motor manufacturers. Incorrect wiring can cause damage to the drive.

 

8. Can I add some features on this drive or do new product development?

Yes, please contact us.






Similar Product Recommend