ChangZhou，JiangSu-
E-mail
sales@jkongmotor.com
-
Phone
0086-519-88372558
-
Address
Building A2, Hutang Industrial Zone, Wujin District, Changzhou, China
Product Categories
- Integrated Servo Motor
- Stepper Motor
- Integrated Bldc Motor
- Customized Link
- Accessories
- Gearbox
- Brushsd Dc Motor
- AC Servo Motor System
- Integrated Stepper Motor
- Coreless DC Motor
- Brushless Dc Motor Driver
- Geared Brushless Dc Motor
- Hollow Shaft Stepper Motor
- Stepper Motor Driver
- Brake Stepper Motor
- Geared Stepper Motor
- Closed Loop Stepper Motor
- Linear Stepper Motor
- Brushless Dc Motor
- Hybrid Stepper Motor
CHANGZHOU JKONGMOTOR CO., LTD.Free·1YRS
JKM Nema 8 Linear Stepper Motor
NegotiableUpdate on November 02
- Model
- Nature of the Manufacturer
- Manufacturer
- Product Category
- Linear Stepper Motor
- Place of Origin
- City, Province
Overview
Model:2PhaseHybridNema8LinearStepperMotor20*20mm-JK20HS(1
Product Details
Model: 2 Phase Hybrid Nema 8 Linear Stepper Motor 20*20mm-JK20HS(1.8 degree)
Linear Stepper Motors: These stepper motors with linear motion are open-loop systems with a base and a slider. They provide high speeds and resolutions. The sliders are also called forcers which contain a permanent magnet, teeth, and motor windings.
Linear motors are commonly used for actuating high performance industrial automation equipment. Their advantage, unlike any other commonly used actuator, such as a ball screw, timing belt, or rack and pinion, is that they provide any combination of high precision, high velocity, high force and long travel.
A stepper motor is a device used for precise motion control, while a linear actuator is a linear motion device used for simple linear motion applications. They differ in construction, feedback, and force and speed characteristics, among other factors.
Motion Control Products range of 20mm (NEMA8) Hybrid stepper motors are ideal for applications where size and cost is an important factor. JKONGMOTOR's NEMA 8 stepepr motors can be supplied with a variety of housings, single or double shaft options, winding configurations and IP rating options, JKONGMOTOR can also provide other stepper motor or bldc motor customized, such as brake, encoder, gearbox or integrated step motor...
NEMA 8 frame (20mm square) is the smallest size of hybrid stepping motor. We supply NEMA 8 stepper motor with 1.8 degree step angle and a weight of only 50g. We also customize the winding to perfectly match your voltage and current. If you want to buy NEMA 8 stepper motor, Our company is definitely your best choice. Our Step motor technology utilizes a simple design to create an effective solution for many applications requiring reasonable accuracy and torque. Get a stepper motor that meets your requirements precisely.
Product Name: Nema 8 Linear Stepper Motor
Size: 20x20mm / 0.79inch Step Motor
Holding Torque: 180g.cm - 400g.cm
Leads No.: 4leads
Motor Length: 30mm / 33mm / 38mm / 42mm
Product Type: 2 Phase Hybrid Stepping Motor
General Specification:
Item | Specifications |
Step Angle | 1.8° |
Temperature Rise | 80℃max |
Ambient Temperature | -20℃~+50℃ |
Insulation Resistance | 100 MΩ Min. ,500VDC |
Dielectric Strength | 500VAC for 1minute |
Shaft Radial Play | 0.02Max. (450g-load) |
Shaft Axial Play | 0.08Max. (450g-load) |
Max. radial force | 28N (20mm from the flange) |
Max. axial force | 10N |
Electrical Specification:
Model No. | Step Angle | Motor Length | Current /Phase | Resistance /Phase | Inductance /Phase | Holding Torque | # of Leads | Motor Weight |
( °) | (L)mm | A | Ω | mH | g.cm | No. | Kg | |
JK20HS30-0604 | 1.8 | 30 | 0.6 | 18 | 3.2 | 180 | 4 | 0.06 |
JK20HS33-0604 | 1.8 | 33 | 0.6 | 6.5 | 1.7 | 200 | 4 | 0.07 |
JK20HS38-0604 | 1.8 | 38 | 0.6 | 10 | 5.5 | 300 | 4 | 0.08 |
JK20HS42-0804 | 1.8 | 42 | 0.8 | 5.4 | 1.5 | 400 | 4 | 0.09 |
Note: Above only for representative products, products of special request can be made according to the customer request.
Feature summary：
Feature summary：Low Inertia, Quick Response; High Torque, High Efficiency; Low Vibration, Low Noise.
Minimum order quantity：10pcs
Material Science：stator, rotor, stainless steel shaft, copper wire, magnetic steel...
Applicatin Scope: 3D Printers, Monitor Equipment, Medical Machinery, Textile Machinery, Packaging Machinery, Lighting, ect.
Packing：The sample is packed in carton,the batch with plastic pallet
Delivery time：Standard product: 7-10days
Customized product: 25-30days
Transaction mode：EXW, FOB, FCA, CIF, FAS, CFR, CPT, CIP, DAF, DEQ, DDU, DDP...
Product Dimensions: (Unit=mm)
Screw rod Specification:
Screw Diameter(mm) | Screw Lead(mm) | Screw Pitch(mm) | Travel per step(mm) | Screw Diameter(mm) | Screw Lead(mm) | Screw Pitch(mm) | Travel per step(mm) |
Tr3.5 | 1 | 1 | 0.005 | Tr6 | 2 | 1 | 0.01 |
0.6096 | 0.6096 | 0.003 | 4 | 1 | 0.02 | ||
2.4384 | 1.2192 | 0.0122 | 6 | 1 | 0.03 | ||
Tr5 | 1 | 1 | 0.005 | 12 | 2 | 0.06 | |
2 | 1 | 0.01 |
Different Types:
Feature summary：High torque; High stability; Easy to plug...
Customized Design:
If this motor do not match with your request. Please feel free to contact with us,We can make customized shaft / winding / mounting flange / cable / connector / Encoder / Brake / Gearbox and others. We will works side-by-side with you and your team to design a motor that will fit the precise needs of your application. All Engineering and Support is done in-house.
Customized Shaft Types:
Matched Drivers:
2 Phase Stepper Motor driver Model: JK0220 / DM420
Similar Product Recommend