Welcome Customer !

Membership

LISHUI TOPO ELECTRONIC CO., LTD.
Free Member ·1YRS
LiShui,ZheJiang
Manufacturer

Main Products: Capacitor

Xwboo>Products

LISHUI TOPO ELECTRONIC CO., LTD.Free·1YRS

  • E-mail

    sales@topo-capacitor.com

  • Phone

    86-578-2129252

  • Address

    ROOM 801, BUILDING 11, ROSE HOME, LIANDU, LISHUI, ZHEJIANG

Contact Now

Shunt Cylinder Capacitor

Model
Nature of the Manufacturer
Manufacturer
Product Category
Power Capacitor
Place of Origin
City, Province
Overview
FeatureSmall volume, light weightLow loss: active loss ≤1.2W/kvarExcellent self-healing property: Rapidly self-healing after midum dielectric breakdown by over-voltage or over-current, recovered to normal work.Good Safety performance: Discharge resitor and over-pressure protection device inside capacitorNo leaking
Product Details
  • Applicable
  • BSMJ series self-healing low voltage shunt power capacitor is applied to improve the power factor of circuit by the parallel connection with AC electric power system with rated voltage lower than 1000V and 50/60Hz.

 

  • Environmental conditions of installation
  • Temperature rage: -25℃/50℃
  • Altitude: ≤2000m
  • When temperature is 35℃, humidity should be ≤90%
  • There is no harmful gases, no electrical conductivity or explosive dust, or violent vibration in the installation place.
  • There shoulde be 30mm gap at least if two sets capacitor need to be installed together. Cooling measures should be taken in hot summer.

 

  • Installation and operation Attention
  • Installation and maintenance should be perfomed by a qualified personnel.
  • Must cut off power before running.
  • Interval between disconnect and next operation should be more than 3 minutes, use a insulation wire to discharge two poles of capacitor before touching capacitor.breakdown by over-voltage or over-current, recovered to normal work.
  • More than 30mm gap should be maintained between capacitors, inner capacitor cabinet should be reserved enough ventilation space and should be installed in a wee-ventilated placetion device inside capacitor enough ventilation space and should be installed in a wee-ventilated place.

 

  • Main models and specifications
  • Single phase products installation dimensions are same as three phases products if their specifications are same.
  • We can supply you other special specification products.
No.ModelOut Diameter (mm)Out Height (mm)Stem
1BSMJ0.4-10-376245M12
2BSMJ0.4-15-386245M12
3BSMJ0.4-20-386290M12
4BSMJ0.4-25-3116245M16
5BSMJ0.4-30-3116290M16
6BSMJ0.45-10-376245M12
7BSMJ0.45-15-376245M12
8BSMJ0.45-20-386245M12
9BSMJ0.45-25-3116245M16
10BSMJ0.45-30-3116290M16
Note: Can be manufactured according to customer’s request.
Similar Product Recommend