Welcome Customer !

Membership

Zhengzhou Jianxin Machinery Manufacturing Co., Ltd.
Free Member ·1YRS
ZhengZhou,HeNan
Manufacturer

Main Products: Batch Mixing Equipment

Xwboo>Products

Zhengzhou Jianxin Machinery Manufacturing Co., Ltd.Free·1YRS

  • E-mail

    jianxin@zzjxcorp.com

  • Phone

    0086-371-86598800

  • Address

    South of 200m west of the intersection of Guangwu Road and G310 in Xingyang City, Zhengzhou City, Henan Province

Contact Now

Dry-mix mortar tank

Model
Nature of the Manufacturer
Manufacturer
Product Category
Place of Origin
City, Province
Overview
Production capacity: 26 m3 Total power: 500 kg Equipment model: Dry-mix mortar tank Field of application: Dry-mix mortar tank is one kind of replace labor and protect the environment on-site mixing machinery.It is suitable for mixing of dry mortar materials with particle size ≤ 5 mm and Can meet the masonry、Plastering、ground mortarand so on construction production needed.
Product Details
Equipment introduction
After the dry mortar is transported to the construction site by the mortar bulk carrier, the mortar is conveying to the dry mortar tank and then the dust is collected at the exhaust outlet of the tank. The dry powder mortar in the tank makes it evenly drop by the vibration of its own gravity and vibratory power of the tank.When the dry powder mortar enter and pre-stirred at the mixer, and then it is forced to quantitatively output through the screw propeller shaft. After enter the mixing end, The water pump supply constant amount of water. the mortar and water are mixed into a wet mortar after being stirred and uniformly dropped through the discharge outlet.
Dry-mix mortar tank
Technical Parameters
projectVolume of tankHeightPremixer capacityGPSWater pump总重量
Dry mixed mortar storage tank26m³8.5m500kgcontain1 centrifugal pumps3189kg
projectVolume of tankHeightPremixer capacity
Dry mixed mortar storage tank26m³8.5m500kg
Product advantages
1.The dry mortar tank is used as a carrier of dry mix mortar store on the construction site. The mortar location and weight of the remaining mortar were transmitted to the computer through the GPS system.
2.According to the computer data decide when supplement mortar
3.When it is necessary to supplement dry-mix mortar, the dry-mix mortar is transported to the construction site by a bulk dry morta. Then transported the mortar by the pneumatic conveying system of the vehicle transport into the tank, At the exhaust port of the tank use dust removal (Sack or water) to dedusting.
4.The dry-mixed mortar in the tank depends on its gravity and the vibration of the tank vibrator to make it fall evenly. The flow control is performed through the butterfly valve linked at the bottom of the tank. During normal use opened at the maximum position.
5.When the dry-mixed mortar enters the mixer, Pre-stirred at the end of the mixer propeller and then forced to quantitatively output by a screw feeder.
6.When the mortar enters the stirring end, The water pump supply constant amount of water. The standard consistency used to water consumption regulating valve by manual control (the standard consistency water demand is provided by the mortar manufacturer according to the product formulation and allowed to fluctuate within certain range), after pressing the start button The vibration motor, the main drive motor, the water pump and the solenoid valve are all started. The vibration motor operates intermittently under the control of the practice relay, and the rest runs with the stirring time.
7.The mortar with water are mixed into a wet mortar by stirring and dropped through the discharge port