Molding cycle: 12-25s Total power: 62.5kW Equipment model: QT10-15 Field of application: 10-15 fire free brick machine is a hydraulic automatic MDF machine. The products produced by this machine can be processed with industrial wastes such as sand, stone。。。
Equipment introduction
The 10-15 type unburnt brick machine is a hydraulic automatic MDF. This machine can use sand, stone, fly ash, coal slag, coal slag, ceramic, perlite and other industrial
waste processing into a variety of new wall materials
Technical Parameters
| Mainframe size | 4300×2260×3600mm |
| Rated pressure | 21MPa |
| Main mode of vibration | Platform vibration |
| Vibration frequency | 2800-4500 times / minute |
| Pallet size | 1400×1100mm |
| Molding cycle | 15-25s |
| Total power | 62.5kW |
| Mainframe size | 4300×2260×3600mm |
| Rated pressure | 21MPa |
| Main mode of vibration | Platform vibration |
| Vibration frequency | 2800-4500 times / minute |
| Pallet size | 1400×1100mm |
| Molding cycle | 15-25s |
| Total power | 62.5kW |
Product advantages
1. The whole machine adopts plc system and computer interface operation to realize random signal analysis, fault diagnosis and parameter setting
to ensure the best working effect of the machine.
2, storage and distribution device - using sealed belt conveyor, strict control of small hopper storage material, to prevent the concrete affected by the residual heat
ahead of liquefaction, to ensure product strength.
3. Forced feeding device—When the distribution box is sent to the top of the mold box, the mixing fork in the distribution box works quickly to ensure that the material
is evenly distributed and the strength of the product is consistent.
4. Increase the effective work surface - The application of new vibration technology makes the machine has a large work surface,
whigreatly improves the production efficiency. The output is 20% higher than that of domestic similar models of multi-hole brick machine
5, the unique form of vibration - the use of computer-controlled hydraulic system flow, pressure, complete the vertical synchronization, frequency conversion, braking,
the use of excess oil when pressurized, it will be converted into vibration force, thereby reducing energy consumption.
6, a reasonable distribution of vibration - the mold cylinder can be over-released mold box locked on the vibration table,
the pressure head is equipped with a special vibrator, to achieve the vibration of the table model, in order to enhance the vibration effect.
This form of vibration allows the concrete to liquefy and vent quickly, allowing the product to achieve high density and high strength.
7. The hydraulic system adopts the buffering device of Germany Siemens.