Hydraulic Bale Cutting Machine

Professional Vertical hydraulic plastic bale cutting machine
1.This hydraulic plastic bale cutting machine is mainly used to cut natural rubber,
synthetic rubber, and other plastics materials, especially it is suitable to be installed
near the rubber mixer to cut small pieces of rubber.
2.This hydraulic plastic bale cutting machine mainly consists of rubber knife, frame,
cylinder, base, auxiliary table, hydraulic system, and electric system.
3.The lead hydraulic plastic bale cutting machine is casted on the base under the
rubber knife for protecting the edge of the rubber knife. When cutting the raw rubber,
put the raw rubber under the rubber knife, then press the start button, the knife can
cut the rubber.
4.We limit switches are installed on the frame to control the reversal valve to change
the movement direction of the rubber knife, at the same time it protects the cover of
the cylinder.
We can design and manufacture all kinds of non-standard rubber machinery
according to the requirements of the customers.
| Model | XQL-80 | XQL-160 |
| 1 | Width(mm) | 660 | 790 |
| 2 | Stoke(mm) | 680 | 680 |
| 3 | Rated cut-off force(KN) | 80 | 160 |
| 4 | Diameter of hydro-cylinder(mm) | 150 | 200 |
| 5 | Time Taken by the Stroke(S) | 10-16 | 10-16 |
| 6 | Rated working oil pressure (Mpa) | 4.5 | 5.0 |
| 7 | pumping flow | 63L/min | 63L/min |
| 8 | Motor power (KW) | 6,5.5KW,960r/min | 6,5.5KW,960r/min |
| 9 | Overall size(mm) | 1950*500*2300mm | 2150*550*2500 |