Specifications
| Model | UF-10A-II |
| working frequency | 200-500KHz
|
Max input power
| 10KW
|
Max. input current
| 45A
|
Heating current
| 5-45A
|
| Input voltage | Single-Phase 220V , 50/60Hz
|
| Duty cycle | 80% |
| Auto timers | 0.1-99.9 seconds |
| Water pressure | ≥ 0.2 Mpa |
| Water flow | ≥5L/min
|
| Water temperature | <35°C
|
| Generator size | 520 x 260 x 450mm
|
| Net weight | 30kg
|
| Packing size | 690 x 385 x 630mm
|
| Packing weight | 56kg
|
Main Applications
Brazing carbide tools.
heating of small wire.
surface quenching.
Brazing for tiny workpiece.
Heating tiny workpiece.
steel and stainless steel screw coating.
copper joint brazing.
Stainless steel strip annealing etc.
floating melt for institute or college research .
tiny or powder material melting.
Main Characteristics
With high frequency up to 500KHZ the quenching thickness can be controlled lower than 1mm, and very thin and tiny parts can be easily heated.
MOSFET and current inverting technologies have been used; higher reliability and lower maintenance cost.
Constant current or constant power status can be selected accordingly to achieve higher heating efficiency;
Display of heating power and heating current and oscillating frequency.
Simple to install , installation can be done by unprofessional person very easily;
Light weight, small size;
different shape and size of induction coil can be changed easily to heat different parts.
Advantages of the model with timer: the power and the operating time of the heating period and the retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability.