| Specifications |
| Model | KU-576 |
| Inner Size (D*W*H)mm | 800*700*900 |
| Capacity(KW) | 11 |
| Chamber Volume(L) | 576 |
| Performance | Temp range | -40℃~+150℃ | -70℃~+150℃ |
| Temp constancy | ±0.5% |
| Temp deviation | ≥100℃, ±3.0℃(at constant pressure with empty load) |
| <100℃, ±2.0℃(at constant pressure with empty load) |
| Cooling rate | 0.7℃~1.0℃/min(Overall average) |
| Pressure range | Constant pressure ~1kPa |
| Pressure constancy | When ≥40kPa, ±2kPa, 4kPa~40pKa ±0.5kPa, when≤4kPa, ±0.1kPa |
| Depressurization rate | Constant pressure~1kPa≤30mins(Normal temp) |
| Pressure recovery rate | 10kPa/Min(adjustable) |
| Material | Exterior material | Cold-rolled steel sheet(Rust proof&Plastic Spray treated)/Stainless Steel plate |
| Interior material | Stainless steel(SUS304) |
| Pressurized parts | High quality steel plate(Rust proof & Plastic spray treated) |
| Insulation material | High quality glass wool |
| Cooling System | Compressor | Semi-Hermetic Compressor |
| Cooling Mode | Water cooled |
| Temp regulating method | Balanced Temperature & Humidity Control System (BTHC) |
| Pump | Rotary vane type vacuum pump |
| Heater | Iron-chrome wire heater |
| Sight window | Circular viewing glass incorporating heat generator |
| Temp Sensor | Pt-100 |
| Controller | Touch Screen Controller |
| Safety Devices | Over pressure, over heat and over current protection for compressor, over temp. protection, over load protection for blower, Hydraulic and Water lack Protection, leakage protection, phase-lack protection, Pump failure alarm |
| Standard Accessory | Sight window, Cable Port( 1 located on the left side), Baffle, Baffle frame*2 |
| Power | AC380V/50Hz, 3Phase 5 wires+ Ground Wire. |
| Note: 1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available |