Thermal shock testing exposes products to alternating low and high temperatures to accelerate failures caused by temperature cycles or thermal shocks during normal use. The transition between temperature extremes occurs very rapidly, greater than 15 C/min.
Thermal shock testing also called temperature shock testing or temperature cycling exposes products toalternating low and high air temperatures to accelerate failures caused by repeated temperature variations during normal use conditions. It is used to accelerate failure modes caused by very rapid changes in temperature.
Two-zone thermal shock test chamber is equipped with a hot and a cold dual zone with individual chamber control. It provides a thermal shock range from (-80 ℃ to 200 ℃).
Features:Water cooled. Ambient Temp. +25℃ no-load |
1.High temperature shock range | +60℃~+150℃ |
2. Low temperature shock range | -55℃~-10℃ |
3. Temp. range of hot zone | +60 ~ +200℃ |
4. Temp. range of cold zone | -75℃~-10℃ |
5. Temperature uniformity | ≦±2℃ |
6. Temperature fluctuation | ≦±0.5℃ |
7. Temperature shock range and recovery time | -45°C~+150°C recovery time 5min (sensor at the air outlet) |
8.High and low temperature exposure time | 30 mins; |
9. Basket transfer time | Less than 10 seconds |
Structure |
1.Internal dimension | W710 × H345 × D410 mm |
2. EX. Dimension | About W1800 × H1850 × D2010 mm (Does not contain the machine prominent part) |
3. Interior material: | SUS304 Matte stainless steel plate |
4. External material: | High-quality carbon steel, the surface for electrostatic color spray treatment |
5. Insulation material | Rigid polyurethane foam insulation + glass fiber |










