Temperature Humidity Test Chamber / KMH-2000L

NegotiableUpdate on September 14

Model

Nature of the Manufacturer: Manufacturer

Product Category: Environmental Test Chambers

Place of Origin: City, Province

Online Consult Contact Information

Overview

Temperature Humidity Test chamber are widely used in testing various types of materials for their tolerances of heat, cold, dry and humidity. It is applicable for quality inspection for all types of electronic products, electric appliance, and products from communication ,instruction , auto, plastic, metal, food, chemical, building materials, medical and aerospace industries. Unique shape with high performance material, whether youre testing aerospace products, electronic instrumentation, materials, electrica......

Product Details

Introducion:

Reliability test for prouduct

Temperature ＆Humidity test chamber can simulate an environment and create effects in a range of temperature and humidity coditions for the purpose of testing the reliability of a prouduct or material. Widely used in Automotive industry such as ECU/electric part, PCU/inverter, Alternator/ISG, Moter or other Vehicle Components.Besides,it is suitable for high temperature testing of power batteries,electronics,machinery and other products,components and materials under simulated temperature and humidity changes.

Make your own chamber with a variety of options

Extended choice of options fitting to your testing. Select your chamber from the door, refrigeration system, instrumentation, size ! Order only what you need.

Main Technical
Water-cooled. The specifications measurement in the environment temperature at + 25 ℃ without load
volume	2000L
1. Temperature
1.1 Temp. range	-70℃～+150℃
1.2 Temp. deviation	≤±2.0℃
1.3 Temp. fluctuation	±0.5℃
1.4 Heating up rate	From -40℃ to +85℃, linear, ≧200℃/h, with load of 300kg, No Heat Emission
1.5 Cooling rate	From -40℃ to +85℃, linear, ≧200℃/h, with load of 300kg, No Heat Emission
2. Humidity
2.1 Humidity range	20%R.H.～98%R.H
2.2 Humidity range
2.3 Humidity deviation	±3.0％RH（＞75％RH）±5.0％RH（≤75％RH）
2.4 Humidity fluctuation	±2.0％RH
3. Floor capacity	300KG/m2
4. Full load	10 PV Modules to be loaded in a vertical orientation. Single panel max. size of 2000100050mm. Total weight of 300KG.
Temperature and humidity performance test is in accordance with the relevant provisions of the IEC60068 standard measurement; sensor placed in the unit outlet.According to national test standard: GB/T 5170.2, use 9 test point calibration, as below:
Body Structure
Overall structure and chamber is composed of three parts as below.Insulation box, separate refrigeration units, and electrical control cabinet.
1. Body dimensions	Workplace volume: W 1000× H 2000 × D 100 mm,Exterior size: W 1500 × H 3120 × D 4130 mm,
2. Insulation Box	※ wall material: high-quality carbon steel※ inner wall material: SUS304 # matte stainless steel plate※ Insulation materials: 100mm rigid polyurethane foam insulation layer + glass fiber.
3. Door	Double door （according to design）, with observation window (the size depend on final design)
4. Lighting Device	Moisture-proof lighting, with explosion-proof lampshades.
5. Cable port	φ100mm*1 located on both side of chamber, with rubber stopper
6.Electric control box	Total power circuit breaker, over-temperature protection.
7. Control model	This device is Cascade compression refrigeration We use intellectual cooling control: PID will control solenoid-valve and heater on/off to adjust cooling or heating capacity according to temperature and loading requirements and status inside the chamber. Only cooling or only heating will be activated to get temperature balance to save energy
8. Heating	High quality nickel-chromium alloy wire electric heaters,Non-contact control mode(SSR)
9. Water outlet hole	Available for drain the condensate water
10. Water purifier	Pure water device, 1 pcs, please provide 1 ~ 2 kg/cm2 tap water
11. Water supply system	Pump to enhance automatic water supply
12. Humidification	Stainless steel corrosion-resistant electric evaporative humidification
13. Humidity sensor	High accuracy Vaisala electronic humidity sensor

FAQ:

Q1 : Can you customize the product?

A: Yes, we can customize any products according to requirements.

Q2 : How to choose the most suitable products?

A: Our professional team will give you the best suggestion, just be patiently to tell us the information about the parameters your required.

Q3 : Can you arrange installations and commissioning in our lab?

A: Firstly, for standard chamber we had 3-5 days commissioning before shipping , you just need link power in your lab, then can start to operate;

Secondly; we had detailed operation manual with chamber , any problems you can find and solve in it;

Thirdly, some of customized chambers we should to install and teach your team to operate.