Large Walk-in chamber

NegotiableUpdate on September 14

Model

Nature of the Manufacturer: Manufacturer

Product Category: Walk-in Chambers

Place of Origin: City, Province

Online Consult Contact Information

Overview

Large temperature and humidity walk-in chamber KMHW-34

Product Details

Specialized Chambers for Solar Panel Tests

Factors

such as desired throughput, testing methodology, floorspace, and budget will affect the final selection.

Our chambers can be used for the following test methods:

•10.11 Thermal Cycle Test

Requires temperature cycling between 85°C and -40°C,

50 or 200 times.

•10.12 Humidity Freeze Test

Cycling between hot/humid 85°C/85%RH and subfreezing -40°C ten times, with extended soaks at 85/85.

•10.13 Damp Heat Test

A long term, 1,000 hour, test at 85°C/85%.

Environmental Chambers for Solar Panel Testing (Walk-in Type)

Specialized Chambers for Solar Panel Tests

From compact type to large type, which can test a lot of full-size PV modules at one time, KOMEG provides various sizes of Solar Panel Walk-in Chambers.

Selecting a Chamber

Because the change rates in the specifications are

flexible, you have a choice of selecting a slower system to save cost and utilities, or a faster system to shorten testing time.

In order for KOMEG to select the proper heating/cooling subsystems, we will need to know:

• Chamber interior space required

• Total mass of modules and supporting racks to be tested

•Desired heat & cooling rates (Otherwise KOMEG will quote systems to meet both minimum or maximum rates allowed by IEC.)

Lengthy IEC and UL Tests

All three of the IEC 61215 & 61646 environmental tests KOMEG chambers are used for can be done in the same test chamber. It may be better, however, to consider multiple chambers to save time and electricity due to the lengths of the tests:

•The temperature cycling test may last up to seven weeks.

•The damp heat test is six weeks long.

•The damp heat test requires only minimal refrigeration, reducing capital and energy costs if a dedicated model is selected for this test

Standards Implemented and met

GB-2423.1-2008(IEC68-2-1)Test A: Cold Test

GB-2423.2-2008(IEC68-2-2)Test B: Dry Heat Test

GJB360.8-2009(MIL-STD.202F) Heat Aging Test

GJBl50.3-2009 (MIL-STD-810D) high temperature test method.

GJBl50.4-2009 (MIL-STD-810D) low temperature test method.

GB2423.3-2008 (IEC68-2-3) Test Ca: Constant damp heat test method.

GB2423.4-2008 (IEC68-2-30) Test Db: Alternating damp heat test method.

GJBl50.9-2009(MIL-STD-810D) Damp heat test chamber technical conditions

The machine complies with IEC61215 10.11, 10.12, 10.13 items IEC61215 10.11 test conditions:

Main Technical
Water-cooled. The specifications measurement in the environment temperature at + 25 ℃ without load
volume	34m³
1. Temperature
1.1 Temp. range	-70℃～+150℃
1.2 Temp. deviation	≤±2.0℃
1.3 Temp. fluctuation	±0.5℃
1.4 Heating up rate	From -40℃ to +85℃, linear, ≧200℃/h, with load of 300kg, No Heat Emission
1.5 Cooling rate	From -40℃ to +85℃, linear, ≧200℃/h, with load of 300kg, No Heat Emission
2. Humidity
2.1 Humidity range	20%R.H.～98%R.H
2.2 Humidity range
2.3 Humidity deviation	±3.0％RH（＞75％RH）±5.0％RH（≤75％RH）
2.4 Humidity fluctuation	±2.0％RH
3. Floor capacity	300KG/m2
4. Full load	10 PV Modules to be loaded in a vertical orientation. Single panel max. size of 2000100050mm. Total weight of 300KG.
Temperature and humidity performance test is in accordance with the relevant provisions of the IEC60068 -3 standard measurement; sensor placed in the unit outlet.According to national test standard: GB/T 5170.2, use 9 test point calibration, as below:
Body Structure
Overall structure and chamber is composed of three parts as below.Insulation box, separate refrigeration units, and electrical control cabinet.
1. Body dimensions	Workplace volume: W 1200 × H 2300 × D 1500 mm,Exterior size: W 1500 × H 2700 × D 3530 mm,
2. Insulation Box	※ wall material: high-quality carbon steel※ inner wall material: SUS304 # matte stainless steel plate※ Insulation materials: 100mm rigid polyurethane foam insulation layer + glass fiber.
3. Door	Double door （according to design）, with observation window (the size depend on final design)
4. Lighting Device	Moisture-proof lighting, with explosion-proof lampshades.
5. Cable port	φ100mm*1 located on both side of chamber, with rubber stopper
6.Electric control box	Total power circuit breaker, over-temperature protection.
7. Control model	This device is Cascade compression refrigeration We use intellectual cooling control: PID will control solenoid-valve and heater on/off to adjust cooling or heating capacity according to temperature and loading requirements and status inside the chamber. Only cooling or only heating will be activated to get temperature balance to save energy
8. Heating	High quality nickel-chromium alloy wire electric heaters,Non-contact control mode(SSR)
9. Water outlet hole	Available for drain the condensate water
10. Water purifier	Pure water device, 1 pcs, please provide 1 ~ 2 kg/cm2 tap water
11. Water supply system	Pump to enhance automatic water supply
12. Humidification	Stainless steel corrosion-resistant electric evaporative humidification
13. Humidity sensor	High accuracy Vaisala electronic humidity sensor