Welcome Customer !

Membership

Guangdong Komeg Industrial Co., Ltd.
Free Member ·1YRS
DongGuan,GuangDong
Manufacturer

Main Products: Environmental Test Chambers

Xwboo>Products

Explosion Proof Temperature Test Chamber For Power Battery

Model
Nature of the Manufacturer
Manufacturer
Product Category
Explosion Proof Temperature Test Chamber For Power Battery
Place of Origin
City, Province
Overview
Product Details

KOMEG supplies a variety of test chambers for testing batteries of any size. We offer extensive experience in chambers designed for testing NIMH, lead-acid, and lithium-ion batteries from small battery cells to large battery packs.

Battery testing chambers are supplied to a variety of industries including, automotive, computer, telecommunications, defense, and alternative energy markets. With the goal of reducing auto emissions and the push toward electric hybrid vehicles, the need for lithium-ion battery testing is even more critical. Our proven experience provides the most cost-effective solutions.

Each test chamber is built according to specific test requirements and may be interfaced with battery cyclers, control & monitoring data acquisition systems, and other test equipment for a complete integrated test solution.

High/Low Temperature Cycling Chambers

Inner Dimension

W920 mm*H680 mm*D500 mm

Outer Dimension

About W1280 mm*H1980 mm*D1150 mm

Temperature Range

-40℃ ~ +85℃

Temperature Fluctuation

±0.5℃

Temperature Uniformity

≦2.0℃

Load situation

Battery components: W120 × H44 × D150 mm, 40 pieces in total, maximum total heating 200W

Door

Full size door, open to left side.

Sealed by silicone stripe on the frame. Heating wires are installed at the door frames to prevent condensation at low temperatures.

Two explosion-proof chains are added on each side of the door, and the chain is longer. When the chamber is blasted, the door can bounce a little, allowing the internal air pressure to quickly escape, but it cannot be ejected to hurt people

Explosion-proof window

With multi-layers hollow glasses painted with electric heating layers to avoid condensation. (W 210×H 270mm), stainless steel protection net inside the glass to prevent the glass from shattering when it is

exploded (cannot guarantee absolute safety).

Explosive pressure relief device

When the pressure in the equipment or pipeline exceeds the pressure of the safety valve, the pressure relief is automatically opened

Equipped with: Inductive switch

Features:

a. When the test product in the chamber explodes, there can be a pipeline for pressure release

b. Protect the test equipment from damage caused by sudden air pressure

c. Protection of personnel

Fire extinguishing device

1. The position and number of spray outlets: the middle position of each layer behind the machine, a total of 4

2. Sprinkler mouth action mode: linkage + manual when the temperature is over temperature;

3. Type of extinguishing agent: water-based extinguishing agent

4. Spray pipe pressure: pressure ≧ 1.2MPa, pipe diameter: DN20.


20190910094638495.jpg

20190910094638546.jpg

20190910094638148.jpg

Similar Product Recommend