| Main Technical Parameters (Air cooled, room temperature +25℃, no load ) |
| 1. Temperature |
| 1.1 Temperature range | -70℃ ~ +150℃ |
| 1.2 Temp Deviation | ≦ ± 2.0℃ |
| 1.3 Temp Fluctuation | ±0.5℃ |
| 1.4 Temp Uniformity | ±2.0℃ |
| 1.5 Ramping and soaking rate | Heating up rate: -70℃↑ +100℃ about 60min (no-load, ambient temperature +25℃) Cooling rate: 20 ℃to -70℃ about 80min (no-load, ambient temperature +25℃) |
| 2. Humidity |
| 2.1 Humidity range | 20%R.H~98%R.H |
| 2.3 Humidity deviation | ±3.0%RH |
| 2.4 Humidity uniformity | 3.0%RH (no-load) |
| 2.5 Humidity fluctuation | ±2.0%RH |
| Temperature and humidity performance test is in accordance with the relevant provisions of the IEC60068 -3 standard measurement; sensor placed in the unit outlet. |
| Chamber Structure |
| Overall structure and chamber was composed of three parts as below.Insulation box, separate refrigeration units, and electrical control cabinet. |
| 1. Chamber size | Workspace volume: 400W X 500H X 400D mm Exterior size: W 600 × H 1460 × D 1220 mm (about) |
| 2. Insulation box | ※ Wall material: high-quality carbon steel with static color spray ※ Inner wall material: SUS304 # matte stainless steel plate※ Insulation materials: rigid polyurethane foam insulation layer + glass fiber. |
| 3. Door | Single door, left open. Heating wire was installed at the door frames to prevent condensation at low temperatures. |
| 4.Observation window | With observation window W216×H230mm, multi-hollow electric insulation coated glass prevent condensation effectively |
| 5.Lighting device | LED Lighting device *1 located on observation window |
| 6. Heating | High quality nickel-chromium alloy wire electric heaters,Non-contact control mode(SSR) |
| 7. Humidifier | Water basin heating and humidification method;Stainless steel sheathed heater;Heater control: no-contact control (SSR);Water level control device, heater anti-dry device. |
| 8. Water outlet hole | Available for drain the condensate water |
| 9. Cable port | Φ50mm*1 located on each side of chamber, with rubber stopper and stainless steel cover |
| 10. Shelf for samples | Two layers of stainless steel sample holder. Adjustable, load capacity 30kg/ layer |
| 11. Casters | Casters with foot cups |
| 12.Electric control box | Total power circuit breaker, over-temperature protection. |
| 13. Water supply system | Water pump automatic supply |