| Parameter | Opening Milling Machine (4inch) |
| Heating type | Cooling type
(MWK-120L) | Electric Heating type
(MWK-120R) | Oil heating type
(MWK-120Y) | Oil/electricity/cooling type
(Double speed-double FM:MWK-120S) | Oil/electricity/cooling type
(Single speed-Single FM:MWK-120D) |
| Mixing capacity | 0.1--2kgs |
| Roller temperature | Normal temperature-tap water℃ | normal temperature～300℃ |
| Temperature precision | no request | ±3℃ static state (Temperature controller is using high precisoin P I D intelligent microcomputer control system
,higher precisoin than manual setting; with over-temperature warning function to protect machine and production material) |
| Heating type | Natural friction | |
| Roller rotation speed | Fixed speed (15 turn around) | Speed Converter
(15 turn around)
other speed could be booked |
| Roller ratio | １：１．２５ | adjustable | １：１．２５ |
| Roller size | Taiwan made high hardness; lens face processing hard chromium surface coating,nonstick, non leafing;Steel hole technology non breakage, non-deformance | ф120mm×L 350mm; lens face processing hard chromium surface coating,nonstick, non leafing;Steel hole technology non breakage, non-deformance |
Taiwan made high hardness; lens face processing hard chromium surface coating,nonstick, non leafing;Steel hole technology non breakage, non-deformance
|
ф120mm×L 350mmTaiwan made high hardness; lens face processing hard chromium surface coating,nonstick, non leafing;Steel hole technology non breakage, non-deformance
|
| Roller distance | 0～5mm adjustable | 0～6mm adjustable |
| Safety device | many touch-type emegency stopper (with reverse function, safety first, humanization design, injury |
| Motor | 1. KW1pc( latest technical design,machine structure adjusting,ａnd traditional technical mechnical drive 3.7KW, same output torque force, to realize enegrgy saving)
| 1. KW2pcs ( latest technical design,machine structure adjusting,ａnd traditional technical mechnical drive 3.7KW, same output torque force, to realize enegrgy saving) | 1. KW1pcs ( latest technical design,machine structure adjusting,ａnd traditional technical mechnical drive 3.7KW, same output torque force, to realize enegrgy saving)
|
| Power | 8HP |
| Dimension | (W×D×H) 1000×550×1200mm(smaller dimension and little area-wasting than traditional technology under the same function |
| Roller lubricating | wear-resisting bearing large contact area;two-thirds of the service life longer than conventional copper |
| Machine structure | steel plate
( more light, samller dimension, higher mechnical strength, better toughness than traditional technology） |
| Power | 3∮，AC380V，8A |
| Others | Multiple safety protection device at front and rear to ensure the safety of operators (sync control by hands and feet - stop - reverse)
Positive safety device includes: an emergency stop button on both left and right, power switch, stop switch, machine body point action reverse door.
Back safety device includes: an emergency stop button on the left and right, machine body point action reverse door.
Oil filling: machine plat is equipped with a lubricating grease gun; butter oil is more wearable than other oil, extending life span of machine.
Pots: SS, easy to clean, pollution-free rust, permanent use
there are two wear-resistant high-temperature profiles at the two ends of roller for the flexible adjusting for width. Any qty of refining rubber could be achieved.
Little refining rubber: adjust to the middle/
Much refining rubber: adjust to both sides. |
，
