Automatic SMC Production Line SMC machine sheet molding compound

NegotiableUpdate on September 14

Model

Nature of the Manufacturer: Manufacturer

Product Category: Automatic production line

Place of Origin: City, Province

Online Consult Contact Information

Overview

1.The control system is controlled by PLC program, which can realize automatic loading.2.The resin is first put in according to the formula amount set by the program, and is automatically stopped when the formula amount is reached, and then automatically stopped when the low shrinkage agent is put into the formula amount.

Product Details

Fully Automatic Resin Mixing Features

1. The control system is controlled by PLC program, which can realize automatic loading.

2. The resin is first put in according to the formula amount set by the program, and is automatically stopped when the formula amount is reached, and then automatically stopped when the low shrinkage agent is put into the formula amount.

3. A resin feed port, a low shrinkage agent feed port and a styrene feed port, a filler feed port are reserved on the Stirring Kettle.

4. The PLC can store multiple different SMC recipes, which can be used by number.

5. Stirring kettle is made of 201 stainless steel for durability.

6. The resin is transported using an imported gear pump or a screw pump with a flow rate of 4-6 cubic meters per hour.

7. Both the Stirring Kettle and the resin storage tank have temperature sensors for monitoring the temperature of the resin paste.

8. The calcium carbonate feed is a vacuum suction conveying method, and the charging time of each calcium carbonate is about 10 minutes.

Whatsapp: +86 176

Fully Automatic Production Line Mixing System Features

1. Composed of three sets of high viscosity gear pumps, mixers and electronic control systems

2. The A, B, and C pumps are driven by servo motors. In the production state, the B and C pumps track the A pump to form a closed-loop control, and are equipped with a mass flow meter with a precision of three thousandths.

3. B, C pump comes with a discharge barrel, the capacity is 100 liters and 50 liters

4. The B and C pumps are all transported by the US Weiken gear metering pump. The A pump uses a Wicken gear pump or an imported screw pump. The A, B, and C pumps are equipped with flowmeters for monitoring the flow rate of the resin paste magnesia paste and the color paste. When any of the components A, B, and C are interrupted, the online system automatically stops.

Parameters

Name	Unit	Value	Remark
Name of machine		SMC Production Line
Model		SMC-1200
Plastic film width	mm	1300
Film Max. diameter	mm	400
SMC Sheet width	mm	Max. 1200
Productivity	m/h	3-700	Adjustable
Resin paste viscosity	Mpas	10000-35000	According to the formula
Fiber content 10%-40%			According to user needs
Blade gap	mm	≤0.03
Fiberglass model	tex	2400-4800
Number of glass fibers	1/set	32-42	2 sets
Fiberglass length	mm	12.5-25-37.5-50	Set by blade
Slicer	Set	2
Fiber dispersion uniform device	Set	2
Exhaust device	Set	5
Dipping zone speed	m/min	3-20	Adjustable
Dipping zone mesh belt width	mm	1250
Dipping zone length	mm	5140
Main motor power	KW	4.5	Servo motor
Cutting motor	KW	2.2*2	Servo motor
Winding motor	KW	2.2	Servo motor
Dimensions	mm	13500 x2400 x2800
Color & MgO Loading method		Manual