Screwdriver torsion test machine
1.Introduction
The test samples are installed in the adjustable space clamp, which can be used to test the mechanical properties of different tested samples. The torque, peak, Angle, curve and other data are collected by computer control. The display shows the torque - time, torsional angle - time, torque - twist Angle test curve of the part being tested. The test data can be stored, tested and printed.
2.Main technical parameters
Style | Horizontal |
Testing machine level | 1 level |
Maximum test torque | 100Nm/200 Nm /500 Nm /1000Nm/2000Nm/5000Nm |
Torque resolution | 0.01Nm/0.1Nm |
The accurate measurement of torque | 1% - 99%F.s |
Value of relative errors show test torque | Less than±1% (precision ±0.5%) |
Value repetition indicated torque relative error test | Less than 1% (precision 0.5%) |
Angle measurement range | 0.01 - 9999.9 degrees |
The relative error of angle | Less than ±1% |
Torsion angles (small angle measurement) shows the Min. resolution | 0.01 degrees |
Reverse speed range | 0.01degrees-720 degrees /min, stepless speed regulation |
Corner shows the minimum resolution | 0.01 degrees |
The test speed and accuracy | Better than showing the value of + 1% |
The power supply voltage | AC220V 50Hz |