GEN photoelectric switch

GEN photoelectric switch
Principle of photoelectric switch
The working principle of the photoelectric switch is that when the beam emitted by the emitter is blocked or partly reflected by the object,the beam receiver where by makes a judgment and reacts.

 Model explanation of Photoelectric Sensor

 

 1. G: Photoelectric sensor
 2. Sub code No.(18, 50, 76.....)
 3. Operating voltage(2: 90-250VAC ;3: 10-30VDC; 4: 12-240VDC/24-240VAC; 5: Special voltage)
 4. Detection method( A: Diffuse type; B: Mirror reflex type; C: Through beam type)
 5. Detection distance (05: 5cm ; 10: 10cm; 30: 30cm; 101: 10m)
 6. Output method(N: NPN transistor output; P: PNP transistor output; J: Relay output; L: AC two-line output; S: NPN+PNP)
 7. Output status(A: NO; B: NC; C: NO+NC)
 8. Auxi function code(T1: Front delay; T2: Rear delay; Y: Oil proof; T: With connector; I: Special requirement)

 Technical Parameters:

 

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 

OVERALL DIMENSIONS
Diffuse type	Detection distance			30m
	10-30VDC	NPN	NO	GEN300-DDT                  NPN/PNP                  Open-connector output 12-24VDC                  Diffuse type:300mm
			NC
			NO+NC
		PNP	NO
	90-250VAC		NC	GEN300-PFR                  Relay output                  24-240VAC/24-240VDC                  Diffuse type:300mm
			NO+NC
		SCR Contro Hable silicon	NO
			NC
		Relay output
Retroreflective type	Detection distance			5m
	10-30VDC	NPN	NO	GEN5M-MDT                  NPN/PNP                  Open-connector output 12-24VDC                  Retroreflective type:0.1-5m
			NC
			NO+NC
		PNP	NO
	90-250VAC		NC	GEN5M-MFR                  Relay output                  24-240VAC/24-240VDC                  Retroreflective type:0.1-5m
			NO+NC
		SCR Contro Hable silicon	NO
			NC
		Relay output
Through beam	Detection distance			10m
	10-30VDC	NPN	NO	GEN10M-TDT                  NPN/PNP                  Open-connector output 12-24VDC                  Through beam type:10m
			NC
			NO+NC
		PNP	NO
	90-250VAC		NC	GEN10M-TFR                  Relay output                  24-240VAC/24-240VDC                  Through beam type:10m
			NO+NC
		SCR Contro Hable silicon	NO
			NC
		Relay output
DC/SCR Control output				DC:200mA,AC:300mA
DC/AC Consumption current				DC<15mA,AC<10mA
DC/AC Response time				Dc<2ms,AC<20ms
Directional angle				3。-10。
Detected object				transparent or opaque body
Working environment temperature				25℃～+55℃
Intensity of illumination of working environment				Sunlight under 1000LX incandescent lamp under 3000LX
Shell material				Plastic
Protection grade				IP54