WenZhou，ZheJiang-
E-mail
wstele@wstele.net
-
Phone
0086-577-27852809
-
Address
Floor 3,Liufeng Building,Liushi Town,Yueqing City,Zhejiang, China (Mainland) 325604
Product Categories
Yueqing Winston Electric Co., Ltd.Free·1YRS
W1241-200 High Load Current High Voltage Auto DC Contactor Relay 500Vdc 200A 200 amp contactor
NegotiableUpdate on October 18
- Model
- W1241-200
- Nature of the Manufacturer
- Manufacturer
- Product Category
- Breaker & Contactor
- Place of Origin
- City, Province
Overview
Product Details
W1241-200 High Load Current High Voltage Auto DC Contactor Relay 500Vdc 200A 200 amp contactor
Main features
· 200A Contact switching capability
· One set of normally open contacts forms
· Coil power consumption is：22～29W Min～Max
· Application Scope：Oil pump startup, Battery truck, Electric forklift,
Electric winch, Electric vehicle, Excavator, Auto air conditioner.
On off control of DC power supply systems.
· Product features：Small volume, high breaking capacity, sealing protection,
and can adapt to harsh service environment
· Product certification: CE
Application
Interpretation of product model
Example：W1241-200/24；Indicates: a group of normally open contacts, sealed type with current of 200A and coil voltage of 24VDC contactor
Performance parameter
| Model | W1241-200/□ |
| Contact form | One set of normally open |
| Contact load | 200A |
| Insulation resistance | Min. 100MΩ at 500VDC |
| Dielectric Strength | 1000VAC 50 HZ/60 HZ (1 minute) Leakage current less than 1mA |
| Instantaneous maximum current | 600A ,≤1S |
| Pull in time(ms) | ≤30 |
| Release time(ms) | ≤50 |
| Pull-in voltage (DC V) | 10～70% US |
| Release voltage (DC V) | 5～40% US |
| Operating ambient temperature | -25℃~+55℃ |
| Mechanical life | ≥300,000 second |
| Degree of protection | IP67 |
| Working system | Short term working system |
| Vibration | （10～200）Hz acceleration ≤3.5g |
| To attack | （60） Times / minute acceleration 6g |
Coil parameters
| Model | Coil voltage (V) | Coil operating voltage（V） | Pull-in voltage（V） | Release voltage（V） | Starting current（A） | Power waste（W） |
| W1241-200/□ | 12 | 0.85US～1.1US | ≤70% | 5～40% | ≤2.5 | 22～29 |
| 24 | ≤1 | 22～29 | ||||
| 48 | ≤0.6 | 22～29 |
Outline installation dimensions and circuit schematic diagram
Matters needing attention
1.When installing the contactor, the tightening torque of the main circuit wiring screw nut is 8～10N.m;
Control circuit wiring screw nut tightening torque 1～1.5N.m.
2.The driving circuit power of the product coil must be greater than or equal to the product coil power,
Otherwise the cutting capacity of the product will be reduced.
3.The voltage continuously applied to the coil shall not exceed the maximum allowable voltage.
Otherwise, the abnormal heating of the coil will shorten the life of the insulation layer.
Packaging & Shipping
W1241-200 High Load Current High Voltage Auto DC Contactor Relay 500Vdc 200A 200 amp contactor
Main features
· 200A Contact switching capability
· One set of normally open contacts forms
· Coil power consumption is：22～29W Min～Max
· Application Scope：Oil pump startup, Battery truck, Electric forklift,
Electric winch, Electric vehicle, Excavator, Auto air conditioner.
On off control of DC power supply systems.
· Product features：Small volume, high breaking capacity, sealing protection,
and can adapt to harsh service environment
· Product certification: CE
Application
Interpretation of product model
Example：W1241-200/24；Indicates: a group of normally open contacts, sealed type with current of 200A and coil voltage of 24VDC contactor
Performance parameter
| Model | W1241-200/□ |
| Contact form | One set of normally open |
| Contact load | 200A |
| Insulation resistance | Min. 100MΩ at 500VDC |
| Dielectric Strength | 1000VAC 50 HZ/60 HZ (1 minute) Leakage current less than 1mA |
| Instantaneous maximum current | 600A ,≤1S |
| Pull in time(ms) | ≤30 |
| Release time(ms) | ≤50 |
| Pull-in voltage (DC V) | 10～70% US |
| Release voltage (DC V) | 5～40% US |
| Operating ambient temperature | -25℃~+55℃ |
| Mechanical life | ≥300,000 second |
| Degree of protection | IP67 |
| Working system | Short term working system |
| Vibration | （10～200）Hz acceleration ≤3.5g |
| To attack | （60） Times / minute acceleration 6g |
Coil parameters
| Model | Coil voltage (V) | Coil operating voltage（V） | Pull-in voltage（V） | Release voltage（V） | Starting current（A） | Power waste（W） |
| W1241-200/□ | 12 | 0.85US～1.1US | ≤70% | 5～40% | ≤2.5 | 22～29 |
| 24 | ≤1 | 22～29 | ||||
| 48 | ≤0.6 | 22～29 |
Outline installation dimensions and circuit schematic diagram
Matters needing attention
1.When installing the contactor, the tightening torque of the main circuit wiring screw nut is 8～10N.m;
Control circuit wiring screw nut tightening torque 1～1.5N.m.
2.The driving circuit power of the product coil must be greater than or equal to the product coil power,
Otherwise the cutting capacity of the product will be reduced.
3.The voltage continuously applied to the coil shall not exceed the maximum allowable voltage.
Otherwise, the abnormal heating of the coil will shorten the life of the insulation layer.
Packaging & Shipping
Our Services
1. Prompt reply: Any inquiry or questions would be replied within 24 hours.
2. Quality Product: Manufacture company, each of the products is tested and calibrated.
3. Hospitality: Offer smiling service and your visiting is highly welcomed
4. Fast delivery: delivery time is within 3-7 days usually, other occasion depends on the order qty.
Our Services
1. Prompt reply: Any inquiry or questions would be replied within 24 hours.
2. Quality Product: Manufacture company, each of the products is tested and calibrated.
3. Hospitality: Offer smiling service and your visiting is highly welcomed
4. Fast delivery: delivery time is within 3-7 days usually, other occasion depends on the order qty.
Similar Product Recommend