Welcome Customer !

Membership

Cixi flowmeter Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 流量计

Xwboo>Products

CX-GRFM-LLQ gas roots flowmeter

Model
Nature of the Manufacturer
Other
Product Category
Flowmeter For Gas
Place of Origin
City, Province
Overview
Illustrate:CX-GRFM-LLQ gas roots flowmeter can be used to measure air , natural gas ,biogas gas.
Product Details

CX-GRFM-LLQ  Gas Roots Flowmeter


Working Principle
CX-GRFM-LLQ series gas roots flowmeter is mainly composed of components such as shell,conjugate rotor and counting device etc. A pair of conjugate rotors installed inside the measuring room kept at the correct relative position through precision-machined adjusting gear under the action of pressure difference (Pinlet>Poutlet) between outlet and inlet of circulating air. Continuous noncontact seal is realized by the best working clearance between rotors, rotor and shell, rotor and wallboard. Each time the rotor rotates, it will output gas four times of
the effective volume of measuring room. The revolution of rotor is transmitted to integrating indicator counter through magnetic seal coupling device and reduction mechanism, thus indicating the accumulative volume of gas outputted. The measuring process and working principle are shown in Figure 1 (only a quarter of one cycle is shown).
 
Position 1             Position 2             Position 3              Position 4

Main Technical Parameters

  1. Error of Flowmeter
LLQ series gas roots flowmeter has the typical error curve and pressure loss curve of volumetric air flowmeter, 
refer to the figure below for details:


Measuring Range
Flow Range Table of CX-GRFM-LLQ Series Gas Roots Flowmeter

Nominal
Diameter
(mm)
ModelStarting
Flow
m3/h
Flow Range
m3/h
Maximum
Pressure
Loss
Pa
Range
Ratio

 
Pressure
Grade
MPa
Accuracy
%
Material
50LLQ-50A0.051.00~20.008020:11.01.0, 1.5Aluminum
LLQ-50B0.071.25~25.008020:11.01.0, 1.5Aluminum
LLQ-50C0.071.33~40.0010030:11.01.0, 1.5Aluminum
LLQ-50D0.071.00~60.0014060:11.01.0, 1.5Aluminum
LLQ-50E0.071.21~85.0020070:11.01.0, 1.5Aluminum
80LLQ-80A0.071.43~100.0015070:11.01.0, 1.5Aluminum
LLQ-80B0.081.17~140.00220120:11.01.0, 1.5Aluminum
LLQ-80C0.152.86~200.0023070:11.01.0, 1.5Aluminum
80LLQ-100A0.113.13~250.0030080:11.01.0, 1.5Aluminum
LLQ-100B0.112.73~300.00350110:11.01.0, 1.5Aluminum
LLQ-100C0.114.09~450.00450110:11.01.0, 1.5Aluminum
LLQ-100D0.115.55~500.00550110:11.01.0, 1.5Aluminum
150LLQ-150A.0.658.13~650.0045080:11.01.0, 1.5Aluminum
LLQ-150B0.7610.00~800.0050080:11.01.0, 1.5Aluminum
LLQ-150C0.7612.50~1000.0060080:11.01.0, 1.5Aluminum
LLQ-150D0.7613.33~1200.0070090:11.01.0, 1.5Aluminum
200LLQ-200A1.1530.19~1600.0065053:11.01.0, 1.5Aluminum
Model Selection, Installation & Operation Maintenance of Flowmeter
 
 
1. Model of Product
CX-GRFM-LLQ-□-□-□-□-□
                     ① ② ③ ④ ⑤
 
Description
 Nominal diameter (mm) and flow range: If complete with 50 A means the caliber is 50 mm, the flow range is
 1~20 m3/h. Please refer to the model in Flow Range Table for specific completion.

 Complete I with chemical gauge head (conventional); complete II with totalizer gauge 
  head (intelligent); complete III with double gauge heads.

 Complete I0 with current output; complete N with N/A.

 Complete R4 with RS485 communication; complete R2 with RS232C

communication; complete RM with standard MODBUS protocol; complete RH with standard HART protocol;
 complete N with N/A. 
 Complete IC with quantitation pulse output of IC card; complete N with N/A
 Complete maximum working pressure (e.g. 1.6 MPa).
Similar Product Recommend