Welcome Customer !

Membership

Cixi flowmeter Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 流量计

Xwboo>Products

CX-PT-3051 single flange pressure transmitter

Model
Nature of the Manufacturer
Other
Product Category
Pressure Transmitter
Place of Origin
City, Province
Overview
Illustrate: Single flange pressure transmitter is widely used for measuring differential pressure (or pressure), level, density of liquid, gas or steam and convert the value of above into current signal output or digital protocol output.
Product Details

CX-PT-3051 Single Flange Pressure Transmitter
 

 

Brief Introduction
  1. Widely used for measuring differential pressure (or pressure), level, density of liquid, gas or steam and convert the value of above into current signal output or digital protocol output.
  2. The pressures are directly applied to the isolating diaphragm that provide isolation and resistance against process fluid corrosion.
  3. Being microprocessor based, the electronic circuit is extremely versatile and accurate.
  4. Combined with the sensor precision, it provides the high accuracy and range ability.
  5. Transmitter performance is improved by continuous monitoring of the sensor temperature and corresponding corrections.
  6. A local display permits easy reading and writing of data.
Dimension


 
Main Parameters


Mediumliquid, gas and steam
Measuring Range 0~0.1kPa to 0~40MPa
Output4~20mA DC+HART protocol
Accuracy±0.1%FS
Range and null pointAdjustable
Power Supply12~45V DC, generally 24V DC
Protection IP65
Storage Temperature-40℃~+125℃
Overload Limit150%-200% ofrated range
Load Resistance≯750Ω(See below diagram 1 for load characteristic )
Relative Humidity5~95%
Converter housingLow copper cast aluminum alloy with Polyurethane paint
Fill FluidSilicon / Fluorine Oil 
Process Connections1/2NPT, 1/4NPT
Static pressure4, 10, 25, 32Mpa
MountingDirectly supported by piping or optionally with mounting bracket for 2" pipes or with direct or remote seals. 3-way valve
Maximum positive shift500% of minimum adjusting span
maximum negative shift600% of minimum adjusting span
MaterialFlange/AdaptorStainless Steel 316/Monel/ Haste alloy/Carton Steel
Drains/VentsStainless Steel 316/Monel / Haste alloy
DiagramsStainless Steel 316/Monel /Haste alloy C/ Tantalum
Wetted O-RingViton/ Buna-N
Seal O-RingViton/ Buna-N
Bolts & NutsCarton Steel/Stainless Steel316
 
Wiring Diagrams

Connect the bench equipment as shown in Figure, and turn on the HART-based communicator by pressing the ON/OFF key. The communicator will search for a HART-compatible device and will indicate when the connection is made. If the communicator fails to connect, it will indicate that no device was found.



Similar Product Recommend