CCF-LAS1S series laser obstacle avoidance sensor - Modbus communication protocol

Compatible with foreign products of the same specification;

Support can interface output;

Support baud rate setting;

Support output mode setting;

It can provide accurate distance measurement regardless of the target reflectivity;

It integrates the cutting-edge SPAD (single photon avalanche diodes) array and embeds ST's second generation flightsensetm patented technology;

The 940nm VCSEL emitter (vertical cavity surface emitting laser) is completely invisible to the human eye. Combined with the internal physical infrared filter, it can achieve a longer distance and stronger ability to resist environmental light,

And better covering the optical cross section of the glass;

Industrial three defense design, wide voltage, low power consumption;

Power supply voltage: DC 9-30v;

Maximum current consumption: 80mA;

Output interface: RS232 or RS485 Output;

Communication protocol: Modbus communication protocol;

Detection effective distance: 4-400cm;

When interfered by light or out of range, the output is 400 + 1 flag bit = 401;

Recommended installation height: 10 mm or more;

Detection angle: less than or equal to 25 degrees;

Ranging accuracy: 1cm;

Resolution: 1cm;

Response speed: 30ms;

Operating temperature range: - 40 ℃ - + 85 ℃;

Working humidity: 10% - 90% relative humidity;

Wiring definition:

Size description: