Fabric Reinforced Rubber Seal R35Rubber Seals

Description

The Fabric rubber seal R35 shaft sealing rings are installed back to back. A lantern ring is included so that lubricant can be forced between the sealing rings. They are used whenever adequate lubrication is ensured by the medium to be sealed.

Materials

Rubber seal: NBR+Fabric (under 100 degree)

                      FKM+Fabric (under 180 degree)

Application   

Rotary seals   

Mills   

Civil engineering   

Forging   

Heavy-duty cylinders   

General machinery   

Steel production   

Ship building   

Wind turbines

Bearings

Advantages

Sealing ring is used, in case of adequate lubrication by the medium to be sealed, preferably where shafts pass through walls in mills and large gearboxes in heavy machinery manufacture.   

Particularly robust static part   

Lasting radial contact pressure

Highly wear-resistant 

Fitting & installation

For Fabric rubber seal R 35 an axially accessible housing is necessary, as the rings must have low inclination.The Fabric rubber seal R 35 rings are supplied with oversize seal width. For reliable function the Fabric rubber seal R rings must be axially compressed to the dimension "L".An open housing with cover plate and tightening screws is necessary. Specific deformation forces are necessary for the compression. The cover plate and the tightening screws are to be designed appropriately. Please request recommended values.