ThreadLockerSealant

NegotiableUpdate on September 13

Model

Nature of the Manufacturer: Manufacturer

Product Category: Sealant

Place of Origin: City, Province

Online Consult Contact Information

Overview

ThreadLocker

Product Details

Anaerobic adhesives are single-component liquids or pastes which can be stored for prolonged periods of time at room temperature in the presence of oxygen but harden rapidly to form strong bonds when confined between surfaces that exclude air.

Generally, "anaerobic" literally means "without air", in other words, removal of air (oxygen) is required for adhesives to cure.

Along with "Removal of air", there is another requirement for the anaerobic adhesives to cure. That is Contact with a metal. In other words, the adhesives do not cure without metal.

An anaerobic adhesive contains a component called "monomer", that occupies about 95%, and a bonding catalyst for metal that occupies about 5%, and other few components.

Morgan Anaerobic Adhesives include thread locker, Pipe Thread Sealant, retaining compounds, and Flat sealing adhesive.

"Threadlocker" is a general term that refers to a liquid polymer that is designed to be brushed onto the thread of fasteners, such as screws, just before they are installed. The polymer dries and locks the fasteners in place, protecting the threads against water, rust and leakage. Thread lockers are especially useful in the assembly of moving parts, engines, hobby toys and plumbing applications in which, for example, a loose gasket screw can result in water damage.

Morgan had a full line of anaerobic adhesive threadlockers. A very large range of viscosity spans from very low wicking grades for post assembly sealing and weld porosity sealing to high viscosity for large nuts and bolts. Morgan threadlockers are available in permanent and removable grades as well as high temperature resistant grades.

Item No.	Color	Surface Curing	Density	Destabilizing	Average Removal	Full Curing	Viscosity	Temperature
Item No.	Color	Time(MIN)	g/cm³	Moment(N.M)	Torque(N.M)	Time(h)	(Mpa•s）	Range(℃)
4222	Purple	30	1.05	2~10	1~6	24	800-1600	-60~+150
4242	Blue	20	1.1	3~15	1~6	24	800-1800	-60~+150
4243	Blue	20	1.05	4~25	3~10	24	1500-3000	-60~+150
4262	Red	20	1.1	15~35	10~25	24	1800-3000	-60~+150
4271	Red	30	1.1	20~45	15~35	24	400-800	-60~+150
4277	Red	30	1.11	20~45	15~35	24	5000-10000	-60~+150
4290	Green	30	1.09	5~25	10~30	24	15-50	-60~+150
4204	Red	30	1.1	20~40	/	72	7000-15000	-60~+150

Packing:

50ml/bottle, 250ml/bottle

Use Points:

For general purpose threads, users need clean threads by rag. Clean the important threads by acetone. Then, use the adhesive.
For thixotropic adhesive, shake it up before use./
For blind hole, users need fill adhesive inside it first.
For Long engaged bolt, both internal thread and external thread should be covered with adhesive.
Use normal hａnd tools to disassemble low/middle strength thread with anaerobic adhesive. Use high torque or high temperature heating (250℃) to disassemble high strength thread with anaerobic adhesive.
The rest adhesive is prohibited to mix into original adhesive liquid. Metal and oil can't be mixed into adhesive bottles.
The adhesive is suitable for metal materials like iron, copper etc. Use accelerating agent for inert metal and non-metallic materials. Accelerating agent can be used after dry by airing.