Welcome Customer !

Membership

Kvtester Electronics Technology Co.,Ltd.
Free Member ·1YRS
,
Other

Main Products: 检测仪器

Xwboo>Products

Kvtester Electronics Technology Co.,Ltd.Free·1YRS

  • E-mail

    sales@kvtester.com

  • Phone

    0086-27-81778799

  • Address

    20,Guanggu Road ,East Lake New High-tech Development Zone,Wuhan,China

Contact Now

Damping pulse divider

Model
Nature of the Manufacturer
Other
Product Category
High Voltage Tester
Place of Origin
City, Province
Overview
Damping pulse divider
Product Details
  • Product Introduction

The ZC-503C Damping pulse divider (also called Impulse Weak Damping Capacitor Divider and Impulse Pulse Divider) is a high voltage measurement system with weak damping (equipotential shielding type), which is mainly used to measure lightning wave, including full lightning wave, 8/20us wave and other lightning wave. It is a special voltage divider for lightning wave. It has the characteristics of simple operation, intuitive display, high precision, small volume and light weight. It is suitable for type test of primary equipment of power grid (such as zinc oxide arrester lightning wave steep wave test, voltage transformer and high voltage switch lightning wave test, transformer type test of substation main transformer, high voltage GIS test, etc.), substation, high voltage electrical equipment manufacturer and high voltage electrical equipment manufacturer. Voltage laboratory and other departments are ideal equipments for lightning wave measurement.

  • Product Parameters
Voltage LevelAC: 50-2000 kV (can withstand the peak impulse voltage of 110% rated value)
Corresponding time<120 ns (special requirements can be customized)
Impulse voltage waveformThe main parameters of full-wave are peak UP, front- wave time T1, half-peak time T2, standard full-wave front- wave time T1 = 1.2us, half-peak time T2 = 50us. In order to obtain high accuracy test data, it is recommended to use American Tektronix oscilloscope above 200M, and other technical indicators should meet the relevant requirements of high voltage lightning wave measurement.
AccuracyAC: 3.0%
Insulation mediumimported capacitor oil
CT RatioTemperature: 0℃~45℃
Humidity: < 85% RH
Partial pressure ratio: 1000:1 or (customized according to customer requirements)
  • Product Features
       1. Balanced equipotential shielding structure is adopted.
       2. High-quality electronic components are used inside the fully sealed insulating cylinder, which makes the whole device accurate and linear.
       3. High precision, high linearity, high stability, anti-jamming
       4. Oil-immersed insulation is used to minimize the internal partial discharge.
       5. Internal shielding anti-jamming system, Omni-directional voltage equalization measures, single section or sub-section structure
       High-precision resistor and low tangent high-voltage capacitor are used in the interior, and the partial discharge is small
Similar Product Recommend